Specifications

9 of 36

50x0CTC3 Series C-Touch Colour Touch Screen Installation Instructions

3.3 Mounting Instructions

There are three options for mounting the touch screen:

• in plasterboard walls using a plasterboard bracket

• in stud walls (such as timber frame internal walls) using a nail bracket

• in solid walls (such as brick or stone) or stud walls using a wall box

Plasterboard Bracket

The C-Touch Colour Plasterboard Bracket (catalogue number 5000CTRM) provides

a means of mounting the touch screen in a plasterboard wall.

In order to install the bracket, there must be an empty space behind the

plasterboard that is 310mm wide and 65mm deep. This space is required to insert

and rotate the bracket. The opening for the bracket is 208mm wide and 162mm high.

To install the plasterboard bracket:

1. Cut out a 208mm x 162mm hole in the plasterboard.

2. Drill four 4mm holes in the plasterboard to provide clearance for the screws that

secure the touch screen.

3. Using the four short screws provided, attach the side clamps to the bracket

body. Do not tighten the screws at this time.

4. Insert the bracket in the cut out hole (see Figure 6) and then rotate the bracket

inside the wall cavity until it matches the cut out.

Figure 6. Plasterboard bracket installation