C-Touch Colour Touch Screen 50x0CTC3 Series User’s Guide
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide Contents 1.0 Product Description........................................................................................3 2.0 Capabilities.......................................................................................................5 3.0 Using the Touch Screen..................................................................................6 3.1 Typical Page for Controlling Appliances....................................................
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide 1.0 Product Description The colour touch screen is a configurable controller and scheduler for C-Bus systems. It has infrared remote capability and a backlit colour display touch screen. The unit mounts in a wall and connects to the C-Bus network, providing control and scheduling of services throughout a home or commercial installation.
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide Figure 1 shows the features of the front side of the unit. Normally, you do not need to remove the front fascia. It must be removed to gain access to the reset button. See the instructions later in this guide for removing and installing the fascia. Touch screen Front fascia Figure 1.
0x0CTC3 Series C-Touch Colour Touch Screen User’s Guide 2.
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide 3.0 Using the Touch Screen The colour touch screen is configured with software customised for a particular location ( such as your home or office). The software typically presents a main page with buttons t hat link to other pages. Most pages contain buttons that control appliances such as lights, fans, and curtains. Some pages contain slider controls, or radio buttons that adjust lighting levels, or select from a range of options.
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide 3.1 Typical Page for Controlling Appliances Figure 4 shows an example of a page that is used to control lights and fans in a kitchen. The page includes: • Scene buttons that set appliances to specific levels. For example, the Cooking button sets the kitchen and bench lights to their highest levels, and switches the exhaust and range hood fans on. • Switch buttons that allow you to toggle appliances on and off.
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide 3.2 Configuration Page The touch screen’s software includes a configuration page, like the one shown in Figure 5. This page allows you to customise your unit. The configuration page may have a different name, such as Tools, Utilities, Setup, Settings or System.
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide 4.0 Remote Control The colour touch screen is supplied with an infrared remote control that allows you to control appliances from a distance. You can use the remote to trigger scenes, switch appliances and adjust lighting levels, depending on how the touch screen was configured by the installer. If you have multiple touch screen units (colour or black & white), you can use the same remote control for all of them.
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide Battery compartment Figure 7. Battery compartment in the 5035TX2 remote control 5.0 Scenes One of the benefits of an automation system, is the combining of events to create a special effect or mood. An example of this is when a movie starts at a cinema. The house lights dim, the curtains open, and the movie begins to play. You can reproduce this effect by creating a scene triggered by your touch screen unit.
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide 7.0 Care Instructions The touch screen unit contains electrical and electronic parts. Follow these guidelines to maintain the unit: • Clean the touch screen regularly using the soft cleaning cloth provided • Do not use chemicals or spray cleaners on the touch screen or the fascia • Do not operate the unit with wet hands • Do not use hard, sharp objects to select the controls.
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide To install the fascia, do the following: 1. Position the fascia over the touch screen, with the IR and indicator windows on the right hand side. Ensure that the clips on the left underside of the fascia are positioned slightly to the left of the matching clips on the touch screen. Clips Figure 9. 2. While applying forward pressure on the left side of the fascia (toward the touch screen), push the left side to the right.
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide 9.0 Specifications Parameter Description Power supply rating 24V d.c., 2.7A, class 2 Display type 16.3cm (6.4 in) TFT Colour Active Matrix LCD Display resolution 640 × 480 pixels Display luminance > 600cd/m² Display contrast ratio > 400:1 Viewing angle left and right: 70°; up: 60°; down: 60° Touch surface durability 35 million touches in any one location, 1 million slide touches C-Bus supply voltage 15 to 36V d.c.
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide 10.0 Two Year Warranty The 5000CTC3 Series Colour Touch Screen carries a two-year warranty against manufacturing defects. Warranty Statement The benefits conferred herein are in addition to, and in no way shall be deemed to derogate, either expressly or by implication, any or all other rights and remedies in respect to the Clipsal by Schneider Electric product, that the consumer has in the location where the product is sold.
50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide 11.0 Installer Details Parameter Description Name Company Address City / Suburb State Postcode / Zipcode Country Voice Phone Mobile Phone Facsimile Email Web © 2013 Schneider Electric. All Rights Reserved.
12.0 Technical Support and Troubleshooting For further assistance in using this product, consult your nearest Clipsal Integrated Systems (CIS) Sales Representative or Technical Support Officer. Technical Support Contact Numbers Australia 1300 722 247 (CIS Technical Support Hotline) New Zealand 0800 888 219 (CIS Technical Support Hotline) Northern Asia +852 2484 4157 (Clipsal Hong Kong) South Africa 011 314 5200 (C-Bus Technical Support) Southern Asia +603 7665 3555 Ext.