User`s guide

9 of 16

50x0CTC3 Series C-Touch Colour Touch Screen User’s Guide

Figure 6. Remote control range

4.0 Remote Control

The colour touch screen is supplied with an infrared remote control that allows you

to control appliances from a distance. You can use the remote to trigger scenes,

switch appliances and adjust lighting levels, depending on how the touch screen

was configured by the installer.

If you have multiple touch screen units (colour or black & white), you can use the

same remote control for all of them. The remote has a range of approximately 8

metres from the infrared receiver at 90° to the touch screen, or 4 metres at 60°. This

is illustrated in Figure 6. A universal remote control with learning capability (such as

the Clipsal 5030URC) can be used to control C-Bus touch screens. Please follow

the instructions of the learning remote control.

The infrared remote control is supplied with a CR2025 (or equivalent) coin type

lithium battery. The battery is shown over the page in Figure 7.

IR Remote

60°

90°