Specifications

Multi Room Audio Matrix Switcher and System Installation Instructions

If your matrix switcher has streaming audio capabilities, you will also use the C-Bus

Ripple server software application.

Please download

Application Note #4 – Configuring C-Bus Ripple Software

for

further information.

Using software not provided or approved by Clipsal could void the hardware

warranty.

The latest version of Toolkit, MARPA and C-Bus Ripple software can be

downloaded free of charge at the following location.

http://www.clipsal.com/cis/portal, select Technical and then select Downloads

C-Bus System Clock and Burden

The MRA matrix switcher and amplifiers incorporate a software selectable C-Bus

system clock. The system clock is used to synchronise data communication over a

C-Bus network. At least one active C-Bus system clock is required on each C-Bus

network for successful communication. No more than three units on a C-Bus

network should have their clock enabled, so this option is normally disabled using

Toolkit. The MRA matrix switcher and amplifiers incorporate a software selectable

network burden. The network burden can be enabled when editing the unit in C-Bus

Toolkit software, but only if the C-Bus system clock is also enabled.