Specifications

Multi Room Audio Matrix Switcher and System Installation Instructions
5
1.2 Safety and Product Handling
Read and understand the following safety hazard information.
WARNINGS
Failure to observe these warnings could lead to serious injury:
• Use only the power supply and cords supplied with the units. Do not substitute
parts from other products.
• You must plug the matrix switcher's power cord into an AC power outlet that
has a protective earthing connection. Never remove the earthing pin from a
power cord plug.
• Multi Room Audio units must be installed in accordance with local authority
guidelines.
• Do not allow liquids to splash or drip on the equipment. In the event of an
accidental spill, unplug the equipment immediately and contact technical
support.
• Do not place cables where people are likely to trip over them.
The amplifiers can produce sounds loud enough to cause permanent hearing loss.
Prevent hearing loss by doing the following:
• Keep volume controls at low levels when selecting program sources or when
connecting local audio sources to an MRA amplifier.
• Plug in headphones to the MRA amplifier before placing the earpieces on your
head or in ears.
• Do not allow children to use the Multi Room Audio equipment without adequate
supervision.
The amplifiers require adequate ventilation. To prevent overheating and possible
injury due to fire or smoke, follow these instructions.
• Do not cover or block the vents on the matrix switcher, MRA amplifiers or power
supplies.
• Provide a clear space around the equipment, at least 50 mm to the front and
rear and 15 mm above.