Specifications

Multi Room Audio Matrix Switcher and System Installation Instructions
7
2 System Cabling
There are two basic methods of cabling and installing the C-Bus MRA system; you
might use a combination of the two. The system can be configured (1) with all
amplifiers installed in a central location where the installation's A/V equipment is
located, or (2) with the amplifiers distributed remotely throughout the installation.
Figure 3 shows and installation where all of the amplifiers are located near the matrix
switcher. The speaker wires run from the central location to the audio zones.
Figure 4 shows the amplifiers placed remotely in the various zones.
Figure 3. An MRA system layout with centrally placed amplifiers
Caution
Do not plug a C-Bus network cable into a Digital Audio socket. You
could damage the matrix switcher or the amplifier.