User`s guide

Multi Room Audio Matrix Switcher and System User's Guide
5
1.3 Care Instructions
The following information is provided to give you the maximum enjoyment and to
ensure the longest possible product life for your MRA system.
Leave the equipment powered on when not in use. The MRA system uses very
little power when not being actively used.
The digital audio connections from the matrix switcher to the amplifiers are for
MRA system use only. They are not compatible with A/V equipment from other
manufacturers.
Do not disturb the audio and control cables attached to the rear panel of the
matrix switcher. The C-Bus, digital audio and Ethernet LAN cables look similar,
but you must never plug them into the wrong sockets. If you are not sure about
cable connections, refer to the
Installation Instructions or call your system
installer.
In order to get the best service from your MRA matrix switcher, follow these
guidelines:
• Clean the unit using a soft lint free cloth.
• Do not use chemicals or spray cleaners when cleaning.
• Do not use hard, sharp objects to select the controls.
• Do not remove any covers or panels.
• Place cables where people will not trip over them.
1.4 Related Product Information
MRA software and documentation is available at the Clipsal web site. Refer to
the following documents, as needed.
C-Bus Multi Room Audio Matrix Switcher and System Installation
Instructions
C-Bus
Multi Room Audio Amplifier Installation Instructions
C-Bus Multi Room Audio Amplifier User's Guide
Software Help files
At the Clipsal Integrated Systems (CIS) Portal you can access software
downloads and literature. Visit the following Internet location:
http://www.clipsal.com/cis/portal Select the 'Technical' area.