Professional Bluetooth Audio Receiver 560011BT Installation Instructions
560011BT Professional Bluetooth Audio Receiver Installation Instructions Contents 1.0 Introduction.................................................................................................................... 3 2.0 Installing the Bluetooth Audio Receiver...................................................................... 4 2.1 Hardware Connection............................................................................................... 4 3.0 Connecting the Power Supply....................
560011BT Professional Bluetooth Audio Receiver Installation Instructions 1.0 Introduction The Professional Bluetooth Audio Receiver sends audio program from your Bluetooth-enabled device to an audio amplifier, such as the C-Bus® Multi-Room Audio Matrix Switcher or Audio Amplifier. The receiver’s front panel includes bass, treble and output level controls (see Figure 1) and uses standard audio cables to connect to the audio system. Figure 1.
560011BT Professional Bluetooth Audio Receiver Installation Instructions 2.0 Installing the Bluetooth Audio Receiver Before you install the wireless Bluetooth connection between the Bluetooth Audio Receiver and your Bluetooth-enabled device, you need to connect the receiver to your home stereo system and to a source of AC power. 2.
60011BT Professional Bluetooth Audio Receiver Installation Instructions 3.0 Connecting the Power Supply The power supply, outlet adapter and USB power cord are supplied with the Bluetooth Audio Receiver. Warning: Avoid Electrical Shock Use only the power supply provided with the Bluetooth Audio Receiver. Do not attempt to disassemble or modify the adapter or the power cable. There are no user serviceable parts inside.
560011BT Professional Bluetooth Audio Receiver Installation Instructions 4.0 Initial Pairing to a Bluetooth-Enabled Device The device that is to be paired with the Bluetooth Audio Reciever should be within 20 metres of the receiver. At greater distances the device might disconnect, requiring reconnection. When connected, the blue LED on the Bluetooth Audio Receiver will flash slowly, returning to a constant blue state when a connection is lost. To connect to an iPad or iPhone, follow these steps: 1.
560011BT Professional Bluetooth Audio Receiver Installation Instructions 5.0 Disconnecting or Changing the Connected Device If you want to switch from one Bluetooth-enabled device to another, follow these steps: 1. Access the Bluetooth settings on your portable device and turn the Bluetooth function to ‘OFF’. 2. The Bluetooth Audio Receiver can now be connected to a different device. 3. Follow the steps in section 4.0 for “Initial Pairing to a Bluetooth-enabled Device” to connect to a new device. 6.
.0 Warranty The Professional Bluetooth Audio Receiver is covered by a two-year warranty against manufacturing defects. 1. The benefits conferred herein are in addition to, and in no way shall be deemed to derogate; either expressly or by implication, any or all other rights and remedies in respect to the Clipsal product, which the consumer has under the Commonwealth Competition and Consumer Act or any other similar State or Territory Laws. 2.