Specifications

6 of 8

560011BT Professional Bluetooth Audio Receiver Installation Instructions

4.0 Initial Pairing to a Bluetooth-Enabled Device

The device that is to be paired with the Bluetooth Audio Reciever should be within 20 metres

of the receiver. At greater distances the device might disconnect, requiring reconnection.

When connected, the blue LED on the Bluetooth Audio Receiver will ﬂash slowly, returning to

a constant blue state when a connection is lost.

To connect to an iPad or iPhone, follow these steps:

1. From the iPad or iPhone home page, select ‘Settings’.

2. From the Settings menu, select ‘General’.

3. From the General menu, select ‘Bluetooth.’

4. Turn Bluetooth ‘ON’ and search for devices. Select the ‘Clipsal’ device ID.

5. When connected, adjust the Treble, Bass and Level controls

Note: For Bluetooth-enabled devices other than those above, refer to the instructions for your

device. To rename the receiver device IDs for different zones in your home, you will need to

download software from the following location:

www.clipsal.com/cis/technical (then select ‘Downloads’).

Your PC must use Windows XP or Windows 7 and have at least 6.5MB of free disk space.

iPad and iPhone are registered trademarks of Apple Inc. Clipsal by Schneider Electric makes

no claims or warranties regarding the compatibility or performance with any speciﬁc type of

Bluetooth-enabled device. Refer to the instructions provided with your mobile device.

Step 1

From your iPad,

iPhone or iPod

Touch home page

select ‘Settings’.

Step 2

Inside Settings,

select ‘Bluetooth’.

Step 3

Turn Bluetooth

‘ON’ and search for

devices, Select the

‘Clipsal or Customised’

device ID.

Step 4

Insert pin code

to screen,

default “0000”.

Clipsal