Specifications

7 of 8

560011BT Professional Bluetooth Audio Receiver Installation Instructions

5.0 Disconnecting or Changing the Connected Device

If you want to switch from one Bluetooth-enabled device to another, follow these steps:

1. Access the Bluetooth settings on your portable device and turn the Bluetooth

function to ‘OFF’.

2. The Bluetooth Audio Receiver can now be connected to a different device.

3. Follow the steps in section 4.0 for “Initial Pairing to a Bluetooth-enabled Device” to connect

to a new device.

6.0 Reconnecting After Moving Out of Range

If you move out of range (a distance of over 20 metres), or if you switch OFF the Bluetooth

function on your Bluetooth-enabled device, the receiver will disconnect.

To reconnect, simply switch the Bluetooth setting ‘ON’ and reselect the device.

Note: The communication range of 20 metres quoted is based on an unobstructed line of

sight test, under optimum conditions. Actual usable range in your home will vary depending on

conditions such as obstructions and electromagnetic interference.

7.0 Troubleshooting

If music is not coming from the stereo speakers, try these solutions:

• Check that the Bluetooth Audio Receiver is powered ON and the blue LED is ON. Ensure that

the power cable (mini-USB plug) is ﬁrmly attached to the receiver.

• Make sure that the audio cable is correctly installed and ﬁrmly connected to the stereo

system and the Bluetooth Audio Receiver.

• Check that the following home stereo system settings are set correctly: Input Selection,

Volume Level and Speaker Selection.

• Check that the volume on your Bluetooth-enabled device is set to a suitable level.

• Verify that the blue LED on your Bluetooth Audio Receiver is ON and ﬂashing slowly,

indicating that your portable device and the Bluetooth Audio Receiver are paired correctly.

• Ensure that your portable device is within 20 metres of the Bluetooth Audio Receiver and that

the antenna is correctly installed on the receiver.

• Ensure that there is a clear line of sight (no solid obstructions) between the portable device

and the Bluetooth Audio Receiver.

If the problem remains after trying these solutions, contact your local sales ofﬁce

for assistance.