C-Touch Colour Touch Screen User’s Guide 50xxCTC2 Series
Clipsal, C-Bus and StarServe are registered trademarks of Clipsal Australia Pty Ltd ABN 27 007 873 529. © Copyright Clipsal Australia Pty Ltd 2008. All rights reserved. This material is copyright under Australian and international laws. Except as permitted under the relevant law, no part of this work may be reproduced by any process without prior written permission of and acknowledgement to Clipsal Australia Pty Ltd. The information in this manual is provided in good faith.
Contents 1.0 Product Range 5 2.0 Description 5 3.0 Definitions 6 4.0 Capabilities 7 5.0 Using the C-Touch Colour 8 5.1 Configuration Page 10 6.0 Remote Control 11 7.0 Scenes 12 8.0 Schedules 13 9.0 Care Instructions 13 10.0 Product Specifications 14 11.0 Warranty 16 12.
C-Touch Colour Touch Screen 4
User’s Guide 1.
C-Touch Colour Touch Screen infrared target is located. With the support of a Clipsal StarServe modulator, the C-Touch Colour video output can be displayed on any TV attached to the Clipsal StarServe system. The appearance of every C-Touch Colour setup is unique, so your display may look different to the examples in this guide. Your installer is responsible for the configuration and features of your unit. Refer to them for details of your customised system. 3.
User’s Guide 4.
C-Touch Colour Touch Screen 5.0 Using the C-Touch Colour The C-Touch Colour is configured with software customised for a particular environment (such as your home or office). The software typically presents a main page with buttons that link to other pages. Most pages contain buttons that control appliances such as lights, fans and curtains. Some pages contain slider controls or radio buttons that adjust lighting levels or select from a range of options.
User’s Guide Figure 3 shows an example C-Touch page used to control the lights and fans in a kitchen. The page includes: • • • • scene buttons which set appliances to specific levels.
C-Touch Colour Touch Screen 5.1 Configuration Page The C-Touch Colour software includes a configuration page, such as the one in Figure 4. This allows you to customise your unit. The configuration page may have a different name, such as Tools, Utilities, Setup, Settings or System.
User’s Guide 6.0 Remote Control The C-Touch Colour is supplied with an Infrared Remote Control, which allows you to control appliances from a distance. You can use the remote to trigger scenes, switch appliances and adjust lighting levels, depending on how the C-Touch Colour was configured by the installer. If you have multiple C-Touch units (Colour or Monochrome), you can use the same remote control with each of them.
C-Touch Colour Touch Screen The Infrared Remote Control is supplied with a CR2025 (or equivalent) coin type lithium battery (pre-installed). The battery location is shown in Figure 6. A universal remote control with learning capability (such as the Clipsal 5030URC) can be used to control C-Touch units. Please follow the directions of your learning remote. CLIPSAL Cat No. 5035TX Figure 6 – Replacing the remote control battery 7.
User’s Guide 8.0 Schedules A schedule is used to make something happen at a particular time. Since this feature is included in the C-Touch Colour, you can ask your installer to include schedules that perform household chores on a regular basis. An example would be to turn the lights on and off when you are away from home to make the house look lived in. You can create the impression that someone is home and moving from room to room at various times.
C-Touch Colour Touch Screen 10.0 Product Specifications C-Touch Colour Touch Screen Parameter Description Supply voltage 5 V DC, 30 W maximum via power pack* Display type 6.4 inch (16.
User’s Guide Infrared Remote Control Parameter Description Supply voltage 3 V DC required for normal operation.
C-Touch Colour Touch Screen 11.0 Warranty The C-Touch Colour Touch Screen carries a two-year warranty against manufacturing defects, with the exception of the 5035TX Infrared Remote Control’s battery, that is limited to 30 days.
User’s Guide 12.
C-Touch Colour Touch Screen Notes 18
User’s Guide This page is intentionally left blank.
Technical Support and Troubleshooting For further assistance in using this product, consult your nearest Clipsal Integrated Systems (CIS) Sales Representative or Technical Support Officer. Technical Support Contact Numbers Australia 1300 722 247 (CIS Technical Support Hotline) New Zealand 0800 888 219 (CIS Technical Support Hotline) Northern Asia +852 2484 4157 (Clipsal Hong Kong) South Africa 011 314 5200 (C-Bus Technical Support) Southern Asia +603 7665 3555 Ext.
