Specifications

page 18
[
StarServe Installers Guide
]
Modulator Combiner
The StarServe Modulator Combiner is an eight-input, one-
output device and is designed to combine multiple modulated
sources on to a single output. This output can then be
connected to an input on the Video Distribution Unit. It is
designed primarily to combine single channel Modulators,
and will not pass a dc current or infra-red signals.
The combiner provides a small amount of gain to offset any
losses in the unit.
This unit is powered by a 12Vdc regulated plug pack. It does
not supply any power to the VDU.
Typical connection diagram for
Modulator Combiner
Ethernet Hub 10-BaseT
The StarServe Ethernet Hub provides connection for up to
five computer network devices. Port 5 on the unit is unused
if the uplink port is used to connect to another hub. Each
port has a corresponding LED indicating a device is
connected and operating correctly. The power LED indicates
power is available and the collision LED indicates a network
collision has occurred.
Pwr Power LED.
Col Collision LED.
Ports 1-5
Uplink port.
Power input.
LINK/ACT
Active Links 1-5
Single Output
8 Inputs from
modulated sources
Catalogue No. 8055HUB10
Compliance IEEE 802.3 10Base-T
Network Interface Output Ports 5 x RJ45 Ports
Uplink Port 1 x RJ45 Port
Maximum Cable CAT5 UTP 100 metres (328 feet)
Length
LED Indicators Each Unit PWR, COL
Each Port LINK/ACT
Power Supply Model Number 8050P5/800
(Not supplied with Output Current 800mA (800mA minimum)
E-Series variant) Output Voltage 5VDC REGULATED (±5%)
Input Power 240VAC / 50Hz
Mechanical Details Dimensions 160 x 100 x 31mm (LxWxD)
Shipping Weight 1kg
Operating Temperature 0 – 50°C
Operating Humidity 10 – 95% RH
Catalogue No. 8051/8VCP
RF Input Number of Modulator Inputs 8
Nominal Modulator Input Level 20dBmV
Maximum Number of 16
Modulated Channels
Connector Type 8 x F-Type
RF Output Number of Outputs 1
Connector Type 1 x F-Type
Output Gain Modulator Input to Output ~1dB
Bandwidth Forward 400-860MHz
Reverse N/A
Power Supply Model Number 8050P12/500
(Not supplied with Output Current 500mA (300mA min)
E-Series variant) Output Voltage 12VDC Regulated
Input Power 240VAC / 50Hz
Mechanical Details Dimensions 160 x 90 x 60mm
( L x W x D)
Shipping Weight (approx) 1.25kg
Operating Temperature 0 – 50°C
Operating Humidity 10 – 95% RH