Specifications

[
StarServe Installers Guide
]
page 7
StarServe
TM
Lite
StarServe Lite is an entry-level system for telephone and
video reticulation.
It provides telephone distribution for four incoming exchange
lines, with each being connected to up to six telephone points
within the home. In addition, the unit has two, 8-pin RJ45
modular connectors. One connector expands the number of
distribution points (utilising an additional wiring hub), whilst
the other connector provides Mode 3 wiring configuration for
security devices.
Broadband (or RF) video distribution is via a one in / six out
Video Distribution Unit (VDU) that provides four outputs for
short cable runs (up to 22 metres) and two for long runs (up
to 45 metres).
The VDU is powered by a 12Vdc regulated plug pack.
All coaxial cables are connected via F-Type connectors. 12
connectors are supplied with the system.
The telephone and video distribution modules hook on to the
base grid plate, the cover then simply hangs from the plate.
There is sufficient space for an additional StarServe module,
such as a data hub, in a StarServe Lite enclosure.