Specifications

Home Networking Solutions12
StarServe Power Options
Directly connect the 12V d.c. 1 Amp
Plug Pack to the 12V d.c. power input
jack on the VDU. This option is only
recommended for enclosures with
power access in a close proximity.
OPTION 3
Plug Pack and Video Distribution Unit
Return path cabling from
main entertainment area
to StarServe Enclosure
concealed within wall cavity
Return path connected to
Modulator Input ‘B’
OPTION 1
Remotely Powered from the Modulator
To power the VDU remotely via the
modulator, slide the ‘remote power’
switch on the side of the Clipsal IR
Modulator to ‘ON’. In this setup, DO
NOT connect a Plug Pack directly to
the VDU.
This is the preferred option.
The StarServe Video Distribution
Unit (VDU) has been designed to
be remotely powered, allowing the
fl exibility of installing the StarServe
Enclosure in any location.
Wall Plate connected to
Modulator Input ‘B’ of the
3105VDU38IRT VDU
or Modulator Input
of the 3105VDU24T VDU
OPTION 2
Remotely Powered from the Power Injector
F-Type to F-Type
Fly Lead connects
Power Injector to
Wall Plate
3105PI12VDC