Specifications

Home Networking Solutions4
Building a new home
When building a new home you have the opportunity to
create a digital ready home. This is an exciting time and
the options for your new home are endless. Take the time
to consider your requirements for today and tomorrow,
such as:
• Digital TV • Pay TV
• Internet • Telephone
• Networking • Audio distribution.
• Surveillance
These are preferred options for people building a new
home and will add signifi cant value to your house, if you
decide to sell in the future. Proper planning can avoid
disappointments after the building has been completed .
It is a lot easier and cost effective to install while you
are building than to try to retrofi t afterwards. You must
have a TV outlet in every location that you wish to have
a television.
Renovating an existing home
Renovating is the perfect time to get a digital health check.
While you have your electrician on-site, they can quickly
check your current installation and advise if you need to
upgrade your cabling.
You can replace an old redundant system with a new digital
ready system. You may also wish to add some telephone
outlets for internet access within different rooms.
StarServe: The next level
StarServe is the next level of TV distribution for your home.
With traditional TV systems you are restricted to the lounge
room to watch a video, DVD or pay TV.
Now with the Clipsal StarServe System you can
independently watch any of these devices and free to air
TV, from any room connected to Clipsal StarServe.
For example: You can watch pay TV in your master
bedroom, a DVD in the study, a video in the rumpus room
and free to air TV in your lounge room, all at the same time.
Everyone gets to watch what they want, when they want
without any arguments.
How do I control my DVD, pay TV
and video in the other rooms
without going back to the lounge?
The Clipsal StarServe System can remotely control your
DVD, pay TV or video from any location in your home
fitted with a Clipsal Remote Control Target. There is no
need to run extra cabling through the walls. You can
add your Remote Control Targets at any time during or
after installation.
This target combined with an emitter lead in your lounge
room can change the device you want to control.
For example: You want to watch a DVD in your bedroom.
You simply aim the DVD remote control at the remote
control target and press play. This sends the DVD’s remote
control signal back to the DVD via the Digital Ready Coax
to the lounge room. The emitter leads in the lounge room
emit the DVD remote control signal to the DVD, and the
DVD starts to play. It’s so simple.
You can use all functions of the remote controls as if you were
in the same room as the device you are controlling.
StarServe in your Home