NO MORTAR NO MESS
easy to install ClipStone® is a brand new innovative, easyto-install stone veneer. With simple common tools, you can turn a plain boring wall into an eye-catching, professional-looking stone wall. Because these are individual stones, you will have added design flexibility unlike many of the stone panels on the market today which can show obvious long seams. ClipStone goes up one at a time, just like traditional stone installed by a professional mason.
variety of colors Poinset ProStack Sand ProStack Ash ProStack Tan ProStack Poinset Ledgestone Sand Ledgestone Ash Ledgestone Tan Ledgestone available corners and accessories Utility Box cream recommended for Poinset, Sand, Tan smoke recommended for Ash Universal 4" tall Corners (Available in all ProStack and Ledgestone colors) Decorative Sills for Windows or Wainscot Cap Light Box Non-ClipStone Products to Complete Your Project: Decorative Sill / Wainscot Corners Starter Strips Hearth Stones M
Fig. 1 Determining Amount of ClipStone® needed NUMBER OF FLAT STONES (see Fig.1) Calculate wall area to be covered with stone (height X width) and subtract area of window and door openings (if applicable). Then add 5% - 10% additional stone material for waste due to cutting or breakage. NUMBER OF CORNER STONES (see Fig. 2) Measure the height of all corner edges to determine the total linear feet of corners needed. Add 5%-10% for waste.
Tools Required How to cut stone (if needed) • 1.25" #8 galvanized waffle head screw ClipStone is easily cut both horizontally and vertically with a chop saw. PLEASE WEAR APPROPRIATE CLOTHING, GLOVES, EYE PROTECTION AND OTHER SAFETY EQUIPMENT RECOMMENDED BY THE CUTTING TOOL MANUFACTURER.
Fig. 6 STEP 1: ATTACH STARTER STRIP (see Fig. 6) • Starter strips are required at the bottom of a wall and across the top of all windows, doors and other openings. • Attach Starter Strip 1" below the bottom of where you want your stone wall height to start. • Cut the Starter Strip to the length of wall being covered with ClipStone. • Have outer layer of Water Resistive Barrier (WRB) positively flashed/layered over top of starter strip a minimum of 2". • Make sure starter strip is level. Fig.
Fig. 10 STEP 5: ADDING ACCESSORIES (see Fig. 10) • 20 inch long Tapered sills are available for capping wainscot or as a window sill to carry water away from windows. • Where outlets are present, an outlet stone is available to fit over a single gang electrical box that has been installed by a licensed professional in compliance with local building codes. • Both accessories come with attachment clips and installed with approved fasteners similar to flats and corners above.
Finally, there is a no mortar no mess, easy-to-install stone veneer. It’s simple and it’s beautiful. You can add ClipStone® to virtually any wall space on your home. ClipStone gives your home that elegance and charm you’ve always wanted, but didn’t want the hassle and mess. ClipStone requires no maintenance, no sealing, no painting or ongoing cleaning and is backed by a 50 Year Product Warranty. myClipStone.