User Manual

3
ARM Control Box Overview
 Link / DSP (2 x RJ12) control ports allow DSP connection and Link / daisy
chain expansion to other control boxes. A single command from a DSP will
simultaneously activate all connected ARM motorised microphones.
 Logic input connections to the Link / DSP control ports pin 2 live and 1 Gnd.
 A positive (+2.5V to +12V) signal applied to the DSP control port will
simultaneously activate all ARM motorised microphones connected to the
control box M1 – M4 RJ45 motor outlet ports.
 M1 – M4 ports allows for fast and easy connection of 4 x ARM motorized
microphones.
 Removable Pheonix connector for the connection of an external 12V DC 2A
supply (ARM-PSU 1).
_ +
 Led power indicator.
 Simple screw fixing of box.
Warning: Under no circumstances must any equipment be
connected to the M1 – M4 motor power outlet sockets of
the ARM controller box. Serious damage to equipment
and control box will occur which is not covered under the
guarantee given.