USER MANUAL
USER MANUAL
1. Safety and usage information The Clone+™ devices have been designed according to the safety standards. Before using this unit, make sure to read the safety and usage information as well as the User Manual. 1.1 Small children and animals The Clone+™ devices contain small parts which may cause choking or serious injuries if swallowed. Keep this unit out of the reach of small children or animals. 1.2 Precautions • • • • • • 4 Keep the Clone+™ device away from rain, moisture and humidity.
2. About Clone+™ 2.1 How it works : The Clone+™ SRF150 Access Server is a main unit which multiplies the privileges of the subscriber card and sends them to the authorised wireless Clone+™ CRF150 Client Cards. The Clone+™ CRF150 Client Cards are subordinate units which co-ordinate the information exchange between the SmartCard reader module in the digital satellite, cable or terrestrial receiver (or CI module) and the Clone+™ SRF150 Access Server.
4. First steps 4.1 Installation of the SRF150 Access Server and authorisation of the CRF150 Client Cards. Step-by-step procedure: 1. 2. 3. Insert the valid subscriber card of the service provider into the server’s SmartCard slot. 1. Wait until the Ready LED is ON. 1. Remove the subscriber card from the server’s SmartCard slot. 1. Insert the CRF150 Client Card into the server’s SmartCard slot. 1. Wait until the Upgrade LED is OFF on the CRF150 Client Card. 1.
SUBSCRIBER CARD 10 Connect the power tip to the SRF150 Server and then plug the power adapter into the 230V AC/50-60Hz mains socket. SUBSCRIBER CARD Insert the valid subscriber card of the service provider into the server’s SmartCard slot.
SUBSCRIBER CARD Wait until the Ready LED is ON. 12 Remove the subscriber card from the server’s SmartCard slot.
Insert the CRF150 Client Card into the server’s SmartCard slot. 14 Wait until the Upgrade LED is OFF on the CRF150 Client Card.
Insert the valid subscriber card of the service provider into the server’s SmartCard slot. SUBSCRIBER CARD Remove the CRF150 Client Card from the server’s SmartCard slot.
4.2 Installation of the SRF150 Access Server working with Twin Slot Interface and authorisation of the CRF150 Client Cards. Insert valid subscriber cards of the service providers into the Twin Slot Interface’s SmartCard slots. Twin Slot Interface enables simultaneous work of subscriber cards of two different service providers. Step-by-step procedure: Authorise the CRF150 Client Cards according to 4.1, steps 1 to 7 for first valid subscriber card of the service provider.
The LED indicators messages about the SRF150 Server status The LED indicators messages about the SRF150 Server status Status LED Description No card in the slot. 0.3 second interval. Invalid subscriber card or subscriber card’s malfunction. The Ready LED is ON for 2 seconds then it turns OFF for 0.1 second. The cycle repeats. Ready to use. The unit is reading the subscriber card. Connection established with the CRF150 Client Card.
5. Software Update Connect the SRF150 Server to a PC via the USB cable. Step-by-step procedure: 1. Connect the SRF150 Server to a PC via the USB cable. 1. Connect the power tip to the SRF150 Server. 1. Plug the server’s power adapter into the 230V AC/50-60Hz mains socket. 1. Install the Clone+ Update application from the CD-ROM. 1. 2. Start the Clone+ Update application and then press „Software Update”. The software update will take about 3 seconds. The prompts will be displayed. 1.
Connect the power tip to the SRF150 Server. 24 Plug the server’s power adapter into the 230V AC/50-60Hz mains socket.
Install the Clone+ Update application from the CD-ROM. Start the Clone+ Update application and then press „Software Update”. The software update will take about 3 seconds. The prompts will be displayed. To install the Clone+ Update application, double-click on the file setup.exe. When you are using Microsoft Windows 2000 or Microsoft Windows XP, double-clicking on the file setup.exe may result in displaying a webpage in the Internet Explorer browser.
Unplug the power adapter from the 230V AC/50-60Hz mains socket. 28 Disconnect the USB cable from the SRF150 Server.
6. Restoring the factory settings 7. Usage and maintenance Step-by-step procedure: Correct disposal of this product: 1. Connect the power tip to the server. (Waste Electrical & Electronic Equipment) 1. Plug the server’s power adapter into the 230V AC/50-60Hz mains socket. 1. Wait until all the LED indicators are ON (after about 15 minutes).
D E C L A R AT I O N O F C O N F O R M I T Y R & T T E Manufacturer PYCH International Electronics Sp. z o.o. ul. Lipkowska 21 04-801 Warszawa herewith declare that: Wireless SmartCard Splitter of Digital PayTV Subscription Clone+™ Home Edition 150: SRF150, CRF150 conforms to the following product specifications: • • • Safety: EN 60950, EMC: EN 301489, Radio: EN 300220.
