ClonerAlliance Flint LX User Manual
ClonerAlliance Flint LX User Manual This documentation describes how to use ClonerAlliance Flint LX (Model: CA1080FL) device. Copyright Notice Copyright © ClonerAlliance® Inc. All rights reserved. Documentation Version 1.
Safety Notices Before using ClonerAlliance Flint LX, please ensure that you read and understand the safety precautions below: 1. Do not attempt to open the case of ClonerAlliance Flint LX or modify it in any way, as this will void the warranty. 2. Keep ClonerAlliance Flint LX away from water and other liquids, as this may cause the unit to malfunction. 3. ClonerAlliance Flint LX may become warm during use. This does not indicate malfunction. 4.
CONTENTS 1 Getting Started 1 1.1 Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.2 Product Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Software Installation 4 2.1 Install and register HDMLCloner Pro Helper (Windows Users) . . . . . . . . . . . . . . . . . . . . .
7 Preview videos for live streaming. 50 7.1 Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 7.2 Install software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 7.3 Setting for preview video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GETTING STARTED 1.1 Box Contents • a. ClonerAlliance Flint LX • b. USB3.0 cable • c. USB3.0(female) to USB TypeC connector • d. USB2.0(female) to USB MicroB OTG cable • e. USB2.0 TypeA female to male connector • f.
ClonerAlliance Flint LX User Manual 1.2 Product Diagram 3 4 1. In: HDMI input port. Connect an HDMI cable between the source video player and ClonerAlliance Flint LX. 2. Out: HDMI output port. Connect an HDMI cable between ClonerAlliance Flint LX and TV. 3. LED: Stable Green indicates ClonerAlliance Flint LX is powered on and Green/Yellow blinks alternately means it is in working mode. 1.2.
ClonerAlliance Flint LX User Manual 4 4. USB3.0: Connect an USB 3.0 cable between ClonerAlliance Flint LX and PC. 1.2.
SOFTWARE INSTALLATION 2.1 Install and register HDMLCloner Pro Helper (Windows Users) 1. Install HDMLCloner Pro Helper HDMLCloner Pro Helper is a smart program to record video discs, game videos, homemade videos or anything from any video source under Windows OS working together with ClonerAlliance Flint LX. • Download HDMLCloner Pro Helper software from https://static.cloneralliance.com/download/hdmlclonerpro.exe • Double click the installation file and the setup wizard window will pop up.
ClonerAlliance Flint LX User Manual 2. Register HDMLCloner Pro Helper Please register HDMLCloner Pro Helper first before using, otherwise it can only be used for 7 days. Launch HDMLCloner Pro Helper. Click ”Input registration code” button in the auto popup Register window. Fill in your proper Email address, real name and code. Then click ”OK” to finish the registration. 2.1.
ClonerAlliance Flint LX User Manual • Obtain the registration code of HDMLCloner Pro Helper. Scan the QR code below to get the code directly. Or visit https://www.cloneralliance.com/register, fill in your product S/N. You will get a registration code directly. It is advised that you input your correct email address to receive the registration code at the same time. You may use the registration code, name and your email address to register HDMLCloner Pro Helper.
ClonerAlliance Flint LX User Manual CFXXXXXXXX (a) Click.Here 2.2 Install OBS Studio (Windows, Mac, and Linux Users) Open Broadcaster Software is a Free and open source software for video recording and live streaming. Download and start streaming quickly and easily on Windows, Mac or Linux. Please install Open Broadcaster Software (OBS Studio) and run it on your computer. Tip: You can click here to download Open Broadcaster Software (OBS Studio). 2.2.
ClonerAlliance Flint LX User Manual 2.2.
RECORD/CAPTURE VIDEOS TO PC. 3.1 Connect 1. Connect the video player to the “IN”port on ClonerAlliance Flint LX via an HDMI cable. 2. Connect the TV to the “OUTPUT”port on ClonerAlliance Flint LX via an HDMI cable. 3. Connect the USB3.0 cable between ClonerAlliance Flint LX and PC.
ClonerAlliance Flint LX User Manual • For Windows After all devices are connected properly, when you power on all devices, go to “Device manager”, it will show “CA FLINT”under “Cameras”and “Sound, video and game controllers”: 3.1.
ClonerAlliance Flint LX User Manual • For Linux Connect ClonerAlliance Flint LX to PC via USB 3.0 cable, go to the “Sound/Input”, it will show it as “CA Flint”in the list. 3.1.
ClonerAlliance Flint LX User Manual • For Mac OS Connect ClonerAlliance Flint LX to Mac, go to“Settings/Sound/Input”it also shows“CA Flint LX Audio Device”among the list. 3.1.
ClonerAlliance Flint LX User Manual 3.2 Record/Capture for Windows users Please download HDMLCloner Pro Helper software and install it on your PC first. See details about Install and register HDMLCloner Pro Helper (Windows Users) 1. After all devices are connected properly, insert the video disc into the drive of the video player and run HDMLCloner Pro Helper. 3.2.
ClonerAlliance Flint LX User Manual 2. Click to start recording. 3.2.
ClonerAlliance Flint LX User Manual 3. Click to stop recording. Tip: During recording, you can also click When you want to resume, please click take screenshots, click to continue recording. to capture GIF animation. Please click to pause at anytime. Besides, you can Click to to use ”Video Broadcast Share”. Software interfaces may vary depending on the version. 3.2.
ClonerAlliance Flint LX User Manual 4. After recording, click to view the recorded video. Then you can click 3.2. Record/Capture for Windows users to play back the video directly.
ClonerAlliance Flint LX User Manual HDMLCloner Pro Helper also supports recording videos at the scheduled time. Click Then click the ”Schedule Recording” button. 3.2. Record/Capture for Windows users to enter the ”Setup” window.
ClonerAlliance Flint LX User Manual Please enable schedule recording first, and set the Start time and duration for schedule recording. Then click “OK”. Then videos will be recorded automatically at the scheduled time. 3.2.
ClonerAlliance Flint LX User Manual 3.3 Record/Capture for Mac OS users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch Quick Time Player. 3.3.
ClonerAlliance Flint LX User Manual 2. Set up Camera/Microphone/Quality as following: 3. You can capture your movie now. 3.3.
ClonerAlliance Flint LX User Manual 3.4 Record/Capture for Linux users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch OBS Studio software. 3.4.
ClonerAlliance Flint LX User Manual 2. In source column, click “+”to add video capture device: 3.4.
ClonerAlliance Flint LX User Manual 3. Please set up as following: 3.4.
ClonerAlliance Flint LX User Manual 4. In source column, click “+”to add audio capture device: 3.4.
ClonerAlliance Flint LX User Manual 5. If you need to monitor the audio during preview/recording, please also modify the settings in advanced audio properties: 3.4.
ClonerAlliance Flint LX User Manual 6. Now you can start recording and streaming. 3.4.
RECORD/CAPTURE GAME CONSOLE WITH PC. 4.1 Connect 1. Connect the game console to the “IN”port on ClonerAlliance Flint LX via an HDMI cable. 2. Connect the TV to the “OUTPUT”port on ClonerAlliance Flint LX via an HDMI cable. 3. Connect the USB3.0 cable between ClonerAlliance Flint LX and PC.
ClonerAlliance Flint LX User Manual • For Windows After all devices are connected properly, when you power on all devices, go to“Device manager”, it will show“CA Flint” under “Cameras”and “Sound, video and game controllers”: 4.1.
ClonerAlliance Flint LX User Manual • For Linux Connect ClonerAlliance Flint LX to PC via USB 3.0 cable, go to the “Sound/Input”, it will show it as “CA Flint”in the list. 4.1.
ClonerAlliance Flint LX User Manual • For Mac OS Connect ClonerAlliance Flint LX to Mac, go to“Settings/Sound/Input”it also shows“CA Flint LX Audio Device”among the list. 4.1.
ClonerAlliance Flint LX User Manual 4.2 Record/capture game console videos to PC You can see details about record/capture game console videos at Record/capture videos to PC. 4.2.
PLAY GAME CONSOLE ON PC WITHOUT TV With ClonerAlliance Flint LX, you can use your PC’s screen to play game console. No TV required. 5.
ClonerAlliance Flint LX User Manual 5.2 Play game console for Windows users Step 1: Please download HDMLCloner Pro Helper software and install it on your PC first. See details about Install and register HDMLCloner Pro Helper (Windows Users) Step 2: Please connect the USB cable of ClonerAlliance Flint LX to your PC. Step 3: Please connect game console to the HDMI port of ClonerAlliance Flint LX with HDMI cable then power up the game console.
ClonerAlliance Flint LX User Manual Note: • ClonerAlliance Flint LX device supports up to 4K input resolution, and the output will be 1080p@60fps automatically. 5.2.
ClonerAlliance Flint LX User Manual 5.3 Play game console for Mac OS users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch Quick Time Player. 5.3.
ClonerAlliance Flint LX User Manual 2. Please confirm the setting of Camera/Microphone/Quality as below. 3. You can capture your game now. 5.3.
ClonerAlliance Flint LX User Manual 5.4 Play game console for Linux users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch OBS Studio software. 5.4.
ClonerAlliance Flint LX User Manual 2. In source column, click “+”to add video capture device: 5.4.
ClonerAlliance Flint LX User Manual 3. It’s recommended that to use 60pfs frame rate while game recording/streaming, please set up as following: 5.4.
ClonerAlliance Flint LX User Manual 4. In source column, click “+”to add audio capture device: 5.4.
ClonerAlliance Flint LX User Manual 5. If you need to monitor the audio during preview/recording, please also modify the settings in advanced audio properties: 5.4.
ClonerAlliance Flint LX User Manual 6. Now you can start recording and streaming. 5.4.
RECORD/CAPTURE VIDEOS TO MOBILE. • System Requirements Android version 7.0 or above 6.1 Connect 1. Connect the video player to the “IN”port on ClonerAlliance Flint LX via an HDMI cable. 2. Connect ClonerAlliance Flint LX to Android phone with the USB2.0(female) to USB MicroB OTG cable or USB typeA to typeC connector. • For USB TypeC socket phone: Please plug USB TypeC cable directly to your Android Phone.
ClonerAlliance Flint LX User Manual 6.1.
ClonerAlliance Flint LX User Manual • For USB MicroB socket phone: Please use USB TypeC (female) to USB (male) connector and MicroB cable to connect to your Android phone. 6.1.
ClonerAlliance Flint LX User Manual 6.2 Record/Capture with ClonerAlliance App Step 1: Please connect source device properly. Step 2: Please install Cloner Alliance APP on your phone and launch it after finishing installation. It will display source video on your phone. 6.2.
ClonerAlliance Flint LX User Manual Step 3: Set up resolution, bitrate and duration (short video capture) by tapping Settings 6.2.
ClonerAlliance Flint LX User Manual lowing picture shows: Video Capture • Resolution: 1920*1080; 1280*720; 720*480 • Bitrate: 100KBps10000KBps • Duration: 3min to infinity 6.2.
ClonerAlliance Flint LX User Manual Step 4: Tap then to record video as configured in ”Preview and recorder” and tap stop automatically as duration configured). to stop recording (short video will Step 5: Tap to check all files have been saved. 6.2.
PREVIEW VIDEOS FOR LIVE STREAMING. You can use ClonerAlliance Flint LX in OBS Studio to preview/record/livestream videos, which is a popular open source software for video recording and live streaming. 7.
ClonerAlliance Flint LX User Manual 1. 2. 3. 4. IN: Connect an HDMI cable between the source video player and ClonerAlliance Flint LX. Connect the TV to the “OUT”port on ClonerAlliance Flint LX via an HDMI cable. Connect the USB3.0 cable between ClonerAlliance Flint LX and PC. LED Indicator: Stable Green indicates ClonerAlliance Flint LX is powered on and Green/Yellow blinks alternately means it is in working mode. 7.
ClonerAlliance Flint LX User Manual 7.3 Setting for preview video Step 1: Launch OBS Studio software on PC, Click “+”icon under “Sources”window, and select “Video Capture Device”: 7.3.
ClonerAlliance Flint LX User Manual Step 2: Select“CA FLINT”in the drop box next to“Device”and at Set Audio Output Mode, please select“Output desktop audio (DirectSound), Audio Device to “”Digital Audio Interface(2CA FLINT)””: 7.3.
ClonerAlliance Flint LX User Manual Step 3: Please make sure the “Sample rate”in “Audio”settings is set to “48KHz”. 7.3.
ClonerAlliance Flint LX User Manual Step 4: Then you can start recording or streaming video: 7.3.
FREQUENTLY ASKED QUESTIONS You can visit https://www.cloneralliance.com/faq.html at any time to view latest technical questions and answers.
ClonerAlliance Flint LX User Manual You can easily distinguish each device through video preview window.
ClonerAlliance Flint LX User Manual And you can select an audio device for each video capture device based on the insertion order. Does ClonerAlliance Flint LX Need Extra Power Supply? No, ClonerAlliance Flint LX can be powered by USB port with PC. Can I Watch The Videos On My TV When I Use ClonerAlliance Flint LX To Record The Videos? Yes. ClonerAlliance Flint LX can passthrough HDMI video signal out to TV while recording video.
ClonerAlliance Flint LX User Manual video without interruption. What if my phone or PC doesn’t have an USB microB socket? Don’t worry, there is a USB2.0(female) to USB MicroB OTG cable included in the package, you can use it to connect to your Android phone. Why Does It Only Have Sound But No Video After Switching Back To Preview Screen With ClonerAlliance Flint LX? Please use a USB Hub to provide power supply for ClonerAlliance Flint LX independently, then it will work well.
ClonerAlliance Flint LX User Manual How to deal with PC doesn’t recognize ClonerAlliance Flint LX device? Please change another USB port and replug in, it’ll help. Why are audio and video out of sync when I use OBS studio with ClonerAlliance Flint LX? Please set up as following and it will perform normally. First, please set CA Flint LX sample rate as 48KHz.
ClonerAlliance Flint LX User Manual And please make sure sample rate in OBS Studio is also set to 48KHz.
ClonerAlliance Flint LX User Manual If your video and audio are still not synchronized, please adjust video delay value in “SourcefilterVideo delay(Async)” around 470ms according to your circumstance.
ClonerAlliance Flint LX User Manual 63
ClonerAlliance Flint LX User Manual 64
ClonerAlliance Flint LX User Manual What is the best method to get help from ClonerAlliance? Chatting with our professional technical support by Live Chat is the best method to solve all problems quickly and efficiently.
ClonerAlliance Flint LX User Manual How to chat by Live Chat? 1. Please go to https://www.cloneralliance.com/ 2. Click the right bottom icon “Click here to chat”(Green Color). 3. Enter your correct name, email, and your question. FYI. In order to help you fix your issue more efficiently. We need to know the exact batch of your hardware, please allow us to know your order information first. If you ordered it at Amazon, let us know your order ID. If your ordered it at eBay, tell me your eBay Username.
PRODUCT SPECIFICATIONS 3840x2160(30HZ), 1920x1080 Input and Output Recording Output for mat Video stan dard (input) Input signal Output sig nals Max trans mission bitrate Bitrate Weight Dimensions 1280x720, 1280x1024, 1024x768, 600x1200 800x600, 720x576, 720x480, 640x480 Up to 60 fps @ 1920x1080 MJPEG,YUY2 NTSC, PAL HDMI HDMI (passthrough), USB 3.0 2Gbps Max: 140Mbps 2.0 oz 3.7 x 2.2 x 0.
AFTER SALES WARRANTY ClonerAlliance Inc. provides 60Day No Hassle Return(No Additional Fee) and 2Year Replacement Warranty Service for all hardware. Please rest assured to use ClonerAl liance products.
CONTACT US If you encounter any problem when using our products, please contact us by support@cloneralliance.com or call 18449CLONER (toll free) and we will serve you with utmost satisfaction. We’ll offer a satisfying discount on batch purchase and affiliate program. If you are interested, please contact us by market@cloneralliance.com.
DISCLAIMER HDMI is a registered trademark of HDMI Licensing, LLC. USB is a registered trade mark of USB Implementers Forum. HDMI and USB are registered trademarks of their respective companies. ClonerAlliance Inc. is not affiliated with those companies.
Toll free: 18449CLONER Support Email: support@cloneralliance.com Market Email: market@cloneralliance.com www.cloneralliance.com Copyright ClonerAlliance Inc. All rights reserved.
