User Manual
Table Of Contents
- Getting Started
- Software Installation
- Switching Display Mode
- Adjust and Mix Audio channels
- Record/capture videos to PC.
- Record/capture game console with PC.
- Play game console on PC without TV
- Record/capture videos to mobile.
- Preview videos for live streaming.
- Product Specifications
- After Sales Warranty
- Contact Us
- Disclaimer
ClonerAlliance Flint D4P User Manual
1. HD1/HD2: Connect an HDMI cable between the source video player and ClonerAlliance Flint D4P.
2. ClonerAlliance Flint D4P device supports up to 4K@60Hz/1080p@144Hz at HD1 Input and
4K@30Hz/1080p@120Hz at HD2 Input, the output will be 1080p@60fps automatically.
3. Connect the TV to the “OUTPUT”port on ClonerAlliance Flint D4P via an HDMI cable.
4. Connect the USB3.0(male) to USB Type-C cable between ClonerAlliance Flint D4P and PC.
5. LED Indicator: Stable Blue indicates HD1 of ClonerAlliance Flint D4P is in working mode, stable Green indicates
HD2 of ClonerAlliance Flint D4P is in working mode, blinking Blue/Green indicates that there is no signal connected
to HD1/HD2 input.
10.2 Install software
If you want to use OBS to preview/record/livestream videos via ClonerAlliance Flint D4P, you need to install both HDML-
Cloner Pro Helper and OBS Studio first.
See details about Install and register HDML-Cloner Pro Helper (Windows Users)
See details about Install OBS Studio (Windows, Mac, and Linux Users)
10.2. Install software 75