User Manual

ManualsBrandsClore Automotive ManualsAutomotiveJump-N-Carry JNC1224 3400/1700 Peak Amp 12/24V Jump Starter

Jump-N-Carry

Models 300, 400, 660, 950, 4000 & 12/24

Charge the Jump-N-Carry

for 24 hours upon opening the box.

The unit must be fully charged before use or long-term storage.

Thank you for purchasing the best jump-starter unit on the market. Your unit has

been equipped with special features to make the jump-starting process easier.

To ensure trouble-free use, please remember to recharge the unit for 24 hours

at least once every 3 months during the winter, and monthly during the summer.

842-355-001

This unit contains a sealed, non-spillable lead-acid

battery, which must be recycled. Consult your local

government concerning regulations for proper disposal.

See Battery Replacement section.

Summary of content (8 pages)

PAGE 1
Jump-N-Carry ® Models 300, 400, 660, 950, 4000 & 12/24 Thank you for purchasing the best jump-starter unit on the market. Your unit has been equipped with special features to make the jump-starting process easier. To ensure trouble-free use, please remember to recharge the unit for 24 hours at least once every 3 months during the winter, and monthly during the summer. Charge the Jump-N-Carry® for 24 hours upon opening the box. The unit must be fully charged before use or long-term storage.
PAGE 2
Safety Information 1. Read these instructions completely before using the product and save them for future reference. 2. WARNING: POSSIBLE EXPLOSION HAZARD — WORKING AROUND LEAD-ACID BATTERIES MAY BE DANGEROUS. LEAD ACID BATTERIES RELEASE EXPLOSIVE GASES DURING NORMAL OPERATION, CHARGING, AND JUMP-STARTING. CAREFULLY READ AND FOLLOW THESE INSTRUCTIONS FOR SAFE USE. ALWAYS FOLLOW THE SPECIFIC INSTRUCTIONS IN THIS MANUAL AND ON THE JUMP-N-CARRY® EACH TIME YOU JUMP-START USING THE JUMP-N-CARRY®. 3.
PAGE 3
Jump-Starting Instructions: Models 300, 400, 660, 950 & 4000 Only WARNING: Failure to follow instructions may cause damage or explosion, always shield eyes. Read this entire instruction manual before use. 1) Use in a well ventilated area. Shield eyes with safety glasses or goggles. 2) Turn off the ignition before making cable connections. 3) Do not touch the RED POS (+) clamp to the BLACK NEG (–) clamp.
PAGE 4
Performance and Temperature Performance of your Jump-N-Carry® will depend upon several factors: • A good, solid connection between the Jump-N-Carry® clamps and the battery and ground connections are a must. Moving the jumper cable clamps back and forth while clamping will help create a better connection. • Clean connections between your vehicle or equipment battery and its terminals are very important.
PAGE 5
Recharging Jump-N-Carry® RECHARGING USING AC POWER Jump-N-Carry® 300 Only: The Jump-N-Carry® 300 comes with a separate wall-mount charger. 1) Plug the charger cord into the recharge jack on the front of the unit, then plug into a 120 VAC outlet. 2) The red Charging LED will illuminate while the charger is plugged into AC power to indicate the unit is charging. Jump-N-Carry® 400, 660 & 4000 Only: The Jump-N-Carry® 400, 660 & 4000 require a household extension cord (not included).
PAGE 6
Storage Jump-N-Carry may be stored virtually anywhere, and in any position. However, take precautions to ensure that the positive and negative clamps do not come into contact with each other or a common metal surface. We recommend storing the Jump-N-Carry® in the box in which it was received. ® Battery Replacement This unit contains a sealed non-spillable lead acid battery. The battery must be recycled. Store in a cool, dry area.
PAGE 7
Questions, Answers and Troubleshooting Q. What should I do if the Jump-N-Carry® will not hold a charge? A. Load test the battery. Charge battery 24 hours before load testing. Connect a load tester (available at your local auto parts store) to the Jump-N-Carry® clamps to check battery amperage. Depending on the model of load tester your load testing procedure may vary. A generic load test would bring the voltage down to 9.0 volts and result in an amp reading of 70 amps for 6 seconds.
PAGE 8
Jump-N-Carry® Limited Warranty Clore Automotive warrants your Jump-N-Carry® to be free from defects in material and workmanship, excepting abuse or misuse, for a period of 1 year from the date of sale to the original user or consumer purchaser. If your Jump-N-Carry® malfunctions or fails within the first 30 days of the warranty period we will replace it with a new unit.