Installation Guide

© 2020 The AMES Companies, Inc. | Orlando, FL 32827 | 1-800-874-0008 (USA, Canada) | www.closetmaid.com 2
Getting Started
General Tips
Design Options
• Please refer to the instruction sheet provided in the product package for the specics on
required & recommended tools and the assembling the products.
• Take an inventory of the parts for the products purchased to insure you have everything
you need for the installation.
• Pre-plan the placement of the towers and closet rods in your cleaned out closet.
• The recommended depth for reach-in closets is 30 in.
• The closet Door location is important when designing your closet. In most circumstances
you will want to place your tower in front of the closet door for ease of access.
• The height of most towers is 82 in. to 83 in. You will want to keep this in mind if you
intend on installing doors in the towers. Although the closet itself may be tall enough to
t in the towers, the doors may hit the front of the closet if the front wall is lower than the
tower.
• It is not recommended to install drawers in the upper unit of the tower, as the height of
the drawer may prevent you from seeing what is inside the drawer.
• Be aware of locations of pocket doors when installing the closet products. Install
products so that the hardware does not inhibit the operation of the pocket door and slide.