Installation Guide

Tower in center with hang rods on the left and right1

Assemble and build your towers rst. Place

your towers in the closet.

Choose which side you want the long hang

and the double hang to be, as you may

want a wider width of double hang.

Measure the length that the rods will need

to be for each side. Make sure that the span

between units or unit and wall is not greater

than 48 in.

Install the closet rods and top shelves (if

purchased for your design).

The top shelves and closet rods t a

maximum span of 48 in. The expandable

closet rods are 30 in. to 48 in. long. If the

length is shorter than 30 in. the rod will

need to be cut.

Assemble and install any doors and drawers into the tower unit.