Installation Guide

Assemble and build your corner unit

and towers rst.

Before attaching the tower to the wall

make sure the closet walls or doors

do not block access to the tower.

Standard towers are 14.5 in. up to

16 in.deep and Hutch style towers are

up to 20 in. deep.

Attach the corner unit and Tower to the

wall. Choose whether you want the

long hang or the double hang for the

middle section. Measure the length

that the rods will need to be. Make

sure that the span between units or

unit and wall is not greater than 48 in.

Install the closet rods and top shelves.

The top shelves and closet rods t a maximum span of 48 in. The expandable closet rods

are 30 in. to 48 in. long. If the length is shorter than 30 in. the rod will need to be cut.

Assemble and install any doors and drawers into the tower unit.

3Corner unit in left corner and Tower on right, hang in center