Installation Guide

3
1
Tower in center with hang rods on the left and right
A)
Assemble and build your towers rst.
Place your towers in the closet.
B)
Choose which side you want the long hang
and the double hang to be, as you may want
a wider width of double hang.
C)
Measure the length that the rods will need
to be for each side. Make sure that the span
between units or unit and wall is not greater
than 48 in.
D)
Install the closet rods and top shelves
(if purchased for your design)
E)
The top shelves and closet rods t a maximum span of 48 in. The expandable closet rods are
30 in. to 48 in. long. If the length is shorter than 30 in. the rod will need to be cut.
© ClosetMaid Corporation 2014 | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com | www.closetmaid.ca
Assemble and install any doors and drawers into the tower unit.
F)