Installation Guide

5© ClosetMaid Corporation 2014 | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com | www.closetmaid.ca
3Corner unit in left corner and Tower on right, hang in center
A)
Assemble and build your
corner unit and towers rst.
B)
Before attaching the tower to the wall
make sure the closet walls or doors
do not block access to the tower.
Standard towers are 14.5 in. up to 16
in.deep and Hutch style towers are up
to 20 in. deep.
C)
Attach the corner unit and Tower to
the wall. Choose whether you want
the long hang or the double hang
for the middle section. Measure the
length that the rods will need to be.
Make sure that the span between
units or unit and wall is not greater
than 48 in.
D)
Install the closet rods and top
shelves.
E)
The top shelves and closet rods t a maximum span of 48 in. The expandable closet rods are
30 in. to 48 in. long. If the length is shorter than 30 in. the rod will need to be cut.
Assemble and install any doors and drawers into the tower unit.
F)