Installation Guide

13
2
1
2
1
4
7
BB
AA
B
B
A
C
3
Top of assembly
Header (A) has 4 holes for
mounting hanging bars
Parte superior del conjunto
La cabecera (A) tiene 4
agujeros para montar las
barras de colgar
Long vertical sides (B) come pre-assembled with couplers in place.
Assemble two long vertical sides (B) with the horizontal top (A) and bottom (C) headers.
Secure the top with screws (AA) and the bottom with levelers (BB).
The first three steps of assembly are completed with the frame laying on its side.
Repeat for an additional frame
Los lados verticales largos (B) ya vienen ensamblados con los acopladores en su lugar.
Ensamble dos lados verticales largos (B) con las cabeceras horizontales superior (A) e inferior (C).
Fije la parte superior con tornillos (AA) y la inferior con niveladores (BB).
Repita para un armazón adicional
Note: Long vertical sides (B) are symmetrical top-to-bottom, do not have an incorrect orientation, and can be
installed in either front or back. Horizontal headers (A, C) are symmetrical front-to-back.
Nota: Los lados verticales largos (B) son simétricos de arriba a abajo, no tienen una orientación incorrecta y
se pueden instalar al frente o atrás. Las cabeceras horizontales (A, C) son simétricas del frente a atrás.