Certifications 2

Page : 9 / 16
MATERIAL SAFETY DATA SHEET
as per 1907/2006/EC, Article 31
628700
Reviewed on: 09.04.2015
Printing date: 09.04.2015
PRODUCT : Dipping lacquer for incandescent lamps
(continued of page 8)
PNEC: 29,5 mg/l (Defecator)
PNEC: 30,4 mg/kg (sediment (Fresh water))
PNEC: 3,04 mg/kg (sediment (seawater))
PNEC: 29,5 mg/kg (Bottom)
64-17-5 ethanol
PNEC: 0,96 mg/l (Fresh water)
PNEC: 0,79 mg/l (Seawater)
PNEC: 580 mg/l (Defecator)
PNEC: 3,6 mg/kg (sediment (Fresh water))
PNEC: 2,9 mg/kg (sediment (seawater))
PNEC: 0,63 mg/kg (Bottom)
141-78-6 ethyl acetate
PNEC: 0,26 mg/l (Fresh water)
PNEC: 0,026 mg/l (Seawater)
PNEC: 650 mg/l (Defecator)
PNEC: 0,34 mg/kg (sediment (Fresh water))
PNEC: 0,034 mg/kg (sediment (seawater))
PNEC: 0,22 mg/kg (Bottom)
78-83-1 butanol
PNEC: 0,4 mg/l (Fresh water)
PNEC: 0,04 mg/l (Seawater)
PNEC: 1,52 mg/kg (sediment (Fresh water))
PNEC: 0,152 mg/kg (sediment (seawater))
71-36-3 butan-1-ol
PNEC: 0,082 mg/l (Fresh water)
PNEC: 0,0082 mg/l (Seawater)
PNEC: 2476 mg/l (Defecator)
PNEC: 0,178 mg/kg (sediment (Fresh water))
PNEC: 0,0178 mg/kg (sediment (seawater))
• 8.2 Exposure controls
• Personal protective equipment:
• General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Avoid contact with the eyes and skin.
• Respiratory protection: If the solvent concentration is above WEL limits, a breathing mask
approved for this purpose must be worn. Filter A/P2.
• Protection of hands: The glove material has to be impermeable and resistant to the product
the substance/ the preparation. Selection of the glove material on consideration of the
penetration times, rates of diffusion and the degradation. Protective gloves made of latex /
neoprene. Degradation effect G to E Instalment of permeation E to ND (< 0.9 µg / cm 2 /
min). Protective factor index: special subject class 6 Clean skin thoroughly after work and
put on skin protecting cream.
• Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks
of quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore
to be checked prior to the application.
• Eye protection: Safety glasses
• Body protection: Protective work clothing
SECTION 09: Physical and chemical properties
9.1 Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Colour: According to product specification
(continued on page 10)
GB