User manual

VB7009
VB7009VB7009
VB7009 User Manual
User ManualUser Manual
User Manual
23
2.2.7. SATA Connectors
The two SATA connectors on board can support up to 3 Gb/s transfer speeds,
enabling fast data file transfer with independent DMA operation. The SATA
connectors are labeled as “SATA1” and “SATA2”. The pinout of the SATA
connectors are as shown below.
SATA1
SATA1SATA1
SATA1
Pin
PinPin
Pin Signal
SignalSignal
Signal
1 GND
2 STXP_0
3 STXN_0
4 GND
5 SRXN_0
6 SRXP_0
7 GND/+5V
SATA2
SATA2SATA2
SATA2
Pin
PinPin
Pin Signal
SignalSignal
Signal
1 GND
2 STXP_1
3 STXN_1
4 GND
5 SRXN_1
6 SRXP_1
7 GND/+5V
Table
Table Table
Table 15
1515
15: SATA connector pinouts
: SATA connector pinouts: SATA connector pinouts
: SATA connector pinouts
Figure
Figure Figure
Figure 19
1919
19: SATA connectors
: SATA connectors: SATA connectors
: SATA connectors
Note:
Note:Note:
Note:
SATA connector pin 7:
1. GND is for SATA HDD (default setting).
2. +5V is for SATA DOM. To enable the +5V on pin 7, set the SATA DOM voltage select jumper.
SATA1
SATA2