User manual

VB7009
VB7009VB7009
VB7009 User Manual
User ManualUser Manual
User Manual
40
3.3. SATA DOM Voltage Select Jumper
The SATA connectors (see page 23) can be used to support Disk-on-Module
(DOM) flash drives. When the jumpers are set, +5V will be delivered to the
7
th
pin of the SATA connectors. The pin jumper is labeled as “J2”. The jumper
settings are shown below.
1
5
2
6
Figure
Figure Figure
Figure 34
3434
34:
: :
: SATA DOM voltage select jumper
SATA DOM voltage select jumperSATA DOM voltage select jumper
SATA DOM voltage select jumper
SATA1 Setting
SATA1 SettingSATA1 Setting
SATA1 Setting Pin 1
Pin 1Pin 1
Pin 1 Pin 3
Pin 3Pin 3
Pin 3 Pin 5
Pin 5Pin 5
Pin 5
DOM support On On Off
Regular (default) Off On On
SATA2 Setting
SATA2 SettingSATA2 Setting
SATA2 Setting Pin 2
Pin 2Pin 2
Pin 2 Pin 4
Pin 4Pin 4
Pin 4 Pin 6
Pin 6Pin 6
Pin 6
DOM support On On Off
Regular (default) Off On On
Table
Table Table
Table 30
3030
30:
: :
: SATA DOM voltage select jumper settings
SATA DOM voltage select jumper settingsSATA DOM voltage select jumper settings
SATA DOM voltage select jumper settings
Note:
Note:Note:
Note:
The default settings of “SATA DOM Voltage Select Jumper”: short pin 3&5 and pin 4&6