User manual

VB7009
VB7009VB7009
VB7009 User Manual
User ManualUser Manual
User Manual
49
5.
5.5.
5. Hardware Installation
Hardware InstallationHardware Installation
Hardware Installation
5.1. Installing into a Chassis
The VB7009 can be fitted into any chassis that has the mounting holes for
compatible with the standard Mini-ITX mounting hole locations. Additionally,
the chassis must meet the minimum height requirements for specified areas of
the mainboard. If a riser card module is being used, the chassis will need to
accommodate the additional space requirements.
5.1.1. Suggested minimum chassis dimensions
The figure below shows the suggested minimum space requirements that a
chassis should have in order to work well with the VB7009.
10.00 mm
5.00 mm
10.00 mm
100.00 mm
1.00 mm
Figure
Figure Figure
Figure 43
4343
43: Suggested minimum chassis dimensions
: Suggested minimum chassis dimensions: Suggested minimum chassis dimensions
: Suggested minimum chassis dimensions
Each side of the mainboard should have a buffer zone from the internal wall
of the chassis. The side of the mainboard that accommodates the I/O coastline
should have a buffer of 1.00 mm. The side on the opposite end of the I/O