User manual

VB7009
VB7009VB7009
VB7009 User Manual
User ManualUser Manual
User Manual
50
coastline should have a buffer of at least 5.00 mm. The two sides adjacent to
the I/O coastline should have at least a 10.00 mm buffer.
For the side that is close to the PCI slot, the buffer should be at least 100.00
mm if a riser card module will be used.
5.1.2. Suggested minimum chassis height
The figure below shows the suggested minimum height requirements for the
internal space of the chassis. It is not necessary for the internal ceiling to be
evenly flat. What is required is that the internal ceiling height must be strictly
observed for each section that is highlighted. The highest part of the ceiling
will be above the PCI slot.
100.00 mm
(70.00 mm if
using riser card)
45.00 mm
50.00 mm
47.00 mm
56.00 mm
Figure
Figure Figure
Figure 44
4444
44: Suggested minimum internal chassis ceiling height
: Suggested minimum internal chassis ceiling height: Suggested minimum internal chassis ceiling height
: Suggested minimum internal chassis ceiling height