User guide

36-50 Installation and User Guide V1.0 23
TECHNICAL SPECIFICATIONS
Line Inputs
Frequency Response 20 Hz to 20 kHz ±0.5 dB
Distortion <0.05%, 20 Hz to 20 kHz
Sensitivity 195 mV (-12 dBu) to 2.0 V (+8 dBu)
Input gain control range 20 dB
Input Impedance 47 kohms
Headroom >20 dB
Noise -90 dB A-weighted (0 dB gain)
Equalisation HF: ±10 dB @10 kHz; LF: ±10 dB @ 50 Hz
Microphone Inputs
Frequency Response 100 Hz -3 dB (xed lter) to 20 kHz ±0.5 dB
Distortion <0.05%, 20 Hz to 20 kHz
Gain Range 0 dB to 60 dB
Input Impedance >2 kohms (balanced)
Common mode rejection >70 dB @ 1 kHz
Headroom >20 dB
Noise -126 dB EIN, 22 Hz to 22 kHz (R
s
= 150 ohms)
Equalisation HF: ±10 dB @ 5 kHz; LF: ±10 dB @ 100 Hz
Outputs
Low Impedance Outputs
4 ohm load(s)
1ch driven 60 W
2chs driven 52 W
3chs driven 45 W
8 ohm load(s)
1ch driven 37 W
2chs driven 34 W
3chs driven 30 W
100V-line Output* 100 V balanced – 250 ohm min. load
70V-line Output* 70 V balanced – 125 ohm min. load
Amplier protection VI Limiting, DC Offset, thermal & switch-on delay
Cooling Convection
* with optional CXL-3120 module tted internally
GENERAL SPECIFICATIONS
Power input 230 V ±5% (115 V ±5% available)
Fuse rating 230 V: T3.15AH; 115 V: T6.3AH
Fuse type 20 mm x 5 mm 250 V
Dimensions 482.6 mm x 88 mm (2U) x 300 mm deep (not inc.
rear connectors)
Weight 6.7 kg net (36-50); 8.9 kg net (36-50T)