Installation Guide

DLM-1 Series Installation Guide V1.0
11
TECHNICAL SPECIFICATIONS
Audio performance - mic input
Sensitivity -50 dBu nominal
Gain range 20 to 40 dB
High pass lter 120 Hz, 12 dB/octave
Input headroom 12 dB
Frequency response 20 Hz – 20 kHz +0.5 dB/-0 dB (HPF disabled)
Noise
Noise gate inactive: -65 dBr, rel 0 dBFS output
(Noise gate active: -95 dBr)
Audio performance – line inputs
Sensitivity
via RCA/phonos: 0 dBu nominal
via 3.5 mm jack: -10 dBV nominal
Maximum input level
via RCA/phonos: +11 dBu
via 3.5 mm jack: +4 dB
Frequency response 20 Hz – 20 kHz +0.5 dB/-0 dB
Noise -90 dBr, rel 0 dBFS output
Dante specications
Dante transmit channels 2
Simultaneous receive ows 2
Dante receive channels 2
Simultaneous transmit ows 2
Sample rates
Dante 44.1 kHz, 48 kHz
AES67 48 kHz
Encoding 16/24/32-bit PCM (default 24-bit)
Data rates 10 Mb/s, 100 Mb/s
Connector 1 x RJ45
LEDs Network speed (yellow), activity (green)
Software compatibility
Audinate Dante Controller (conguration and routing)
Audinate DDM (security and domain management)
Other
Power requirements
Via PoE. A Class 1 (3.84 W max.) injector required for use
with non-PoE switches.
Power consumption: <1 W
Net dimensions, inc. faceplate controls
(w x h x d)
DLM-1 (UK) 145 mm x 85 mm x 50mm (5.71” x 3.35” x 1.97”)
DLM-1A (US) 112 mm x 110 mm x 50 mm (4.41” x 4.33” x 1.97”)
Shipping dimensions (w x h x d) All versions 200 mm x 145 mm x 83 mm (7.87” x 5.71” x 3.27”)
Net weight
All versions
252 g (8.9 oz)
Shipping weight 350 g (12.3 oz)
Should you have any questions concerning the installation and connection of the DLM-1, please visit
www.cloud.co.uk/resources,
where you will nd additional technical information.