Installation guide

46/50 Integrated Mixer Amplifier Setup And Installation Guide
CLOUD ELECTRONICS LIMITED
11.2 DM-1 Dual Microphone Input Module
The Cloud DM-1 is a remotely located active module with two balanced microphone inputs via 3
pin female XLR connectors. Each input has a level control and tamperproof treble and bass
equalisation controls. A 'music ducking' switch provides facility input priority over the main
system music if required. Modules can be linked when wired in a 'daisy chain' format (see section
11.3). Use 7-core screened cable to link the DM-1 to the facility input.
11.3 Wiring 2 or more DM-1's in a daisy chain format
The following diagram shows how to connect two DM-1's together in a daisy chain format, when
wired in this configuration the EQ controls on each DM-1 should be set to the neutral position; if
any adjustment is required then the controls of the DM-1 'nearest' the mixer should be used. Use
7-core screened cable to link first DM-1 to the facility input and 5-core screened cable when
wiring one DM-1 to another.
12
V6 070113
1
2
3
45
6789
FACILITY
PORT
CABLE
SCREEN
DM-1
12345678
CONNECTOR PIN NUMBER
9 PIN SUB D 1 2 3 4 5 6 7 8 9 SHELL
DM-1 Terminals N/C N/C 5 6 2 7 8 4 1 3
DM-1 CONNECTION TABLE
1
2
345
6789
FACILITY
PORT
CABLE
SCREEN
DM-1DM-1
1233 44 55 66 77 89108