User guide

PM4/8/12/16 Installation and User Guide v2.2
26
Conguring dual purpose microphone inputs on the Host Mixer
NOTE: This section is only applicable to systems using Cloud Integrated Mixers
Models 36/50 or 46/50, or Zone Mixers Models CX263 or CX163.
On these mixers, Mic 1 input needs to be congured for paging use with a Cloud
PM by enabling the Mic Access input on the rear panel. Without the Mic Access
input enabled, Mic 1 input acts only as a general purpose microphone input and is
permanently active.
The table below lists the jumpers within each host mixer that need to be changed.
Mixer Zone 1 Zone 2 Zone 3 Zone 4 Utility Zone
36/50 J2 J3 J4
46/50 J23 J22 J21 J20
CX263 J4 J5 J6
CX163 J1 J2 J3
Full details of how to enable the Mic Access input can be found in the installation
guide supplied with the mixer, or at www.cloud.co.uk.