User manual
VTX-WM1 Installation Guide v1.016
Specications
Tone Generator
Test Signal Level
40 dB below max amp
output
Injected post level controls,
other channels muted.
Frequency range 60 Hz to 20 kHz in 1/3-octave steps
Sensitivity 1 to 100 Ohm detection
Signal detector
Sensitivity -30 dBu to +10 dBu 20 Hz to 20 kHz
Networking
DHCP Not supported
Data rates 10 BaseT or 100 Base T (automatic selection)
Connector RJ45; Auto MDI/MDIX
eMail protocols SMTP (no encryption)
Supported Ampliers
VTX4120, VTX4240, VTX4400
Recordable Events
Over temperature (90°C), Power on/off, Email error, Load Test pass/fail