Instructions / Assembly

Blower Operation
For models that include a blower please refer to these instructions for important safety and operation information.
WARNING
• Blower component is not a toy. Please keep away from children.
• Use only with grounded GFCI power outlet.
• Do not use in or near water, rain, or inclement weather.
• Never plug or unplug with wet hands or while standing in water.
• Remove small objects from the area that may be propelled or sucked into the blower before and during use.
• Do not use with solid-state speed control device as increased risk of fire or electrical show can occur.
• Do not direct air stream at face or body.
• This device is not user serviceable and must be repaired by qualified technician or service center.
OPERATION
1. Plug blower into 120V GFCI grounded power outlet. Use of an extension cord is not recommended. However, if needed
use the shortest length possible.
2. If applicable, anchor the blower to the ground using stakes.
3. Use power switch to turn off blower and unplug after each use.
MAINTENANCE
1. Use a dry or damp cloth with a non-abrasive neutral cleaner, or water to wipe the surface of the blower casing.
2. Do not clean blower with water by spraying down or into the fan.
3. Unplug and store indoors in a cool, dry area when not in use.