Instruction Manual

Shenzhen Cloudecho Audio Co. Ltd

Super slow flashing (1s on, 1s off)

Mute

Table 2 Bluetooth indicator and its corresponding working status

If you want to disconnect Bluetooth, hide Bluetooth or release Bluetooth, you can press the

RESET/WPS button briefly.

2.3 Vinyl mode

Click the Mode button, the LP indicator lights up and enters the vinyl mode. The RCA connector of

the device and the vinyl record player is located on the back of the device labeled "PHONO". The

LP indicator flashes slowly when muted (1s on and 1s off).

2.4 Aux in mode

Click the Mode button, the LP indicator flashes slowly (500ms off and 500ms on) to enter Aux in

mode. The Aux in connector of the device and the audio source is located on the back of the

device labeled "AUX". The LP indicator flashes slowly when muted (1s on and 1s off).

2.5 Optical fiber Mode

Click the Mode button, the OPT indicator lights up and enters the optical fiber mode. The

connector of the device and the audio source is located on the back of the device marked

"OPTICAL". The OPT indicator flashes slowly when muted (1s on and 1s off).

3. Volume and bass adjustment

By default, the knob is used to adjust the volume. When the Mode button is pressed for a long

time, the Bass light is on to indicate that the knob is to adjust the bass strength; long press the

Mode button again, the Treb light is on to indicate that the knob is to adjust the treble strength

and weakness; Long press the Mode button again, the Bass, Treb lights Off, it means that the knob

is used to adjust the volume level;

3.1 Volume adjustment

Turn the knob on the front panel, turn clockwise to increase the volume and turn counterclockwise

to decrease the volume. At the same time, the number of lights indicates the volume. The more

lights, the louder the volume. When the knob is not operated for 2 seconds, the light indicator

jumps back to the mode display.