Computer Monitor User Manual

6. How to Operate

6-10.4. Copying the recorded data during replaying

The system allows users to copy the recorded data during replaying.

▫ Start replaying (See section 6-9).

▫ Right-click on the replaying screen, and then the COPY DATA screen will be displayed

(See

Fig.6-43).

▫ To set the starting time and date to copy, select the values (year/month/date window

and hour/minute/second) on the COPY DATA window by clicking the mouse, change the

values with the mouse’s wheel and click the mouse again on the changed values to

complete.

▫ Select each of channels (1 through 8 in red) or “A” in black for all the channels on the

COPY DATA window, and then click on the SELECTED button to save.

▫ To set the ending time and date to copy, right-click on the replaying screen again, and

the COPY DATA window that contains end time for copying will be displayed (See

Fig.6-44).

Set the ending time and date to copy as described above.

▫ To select the COPY MODE, click on the GO TO COPY button (See

Fig.6-44), and then the

COPY window (See

Fig.6-38) will be displayed. The time and date (starting time and ending

time) to copy can be changed on the COPY window as well (See section 6-10.2).

[Fig.6-43 Start Copy Time Setup window]