H.264 16/8/4CH Pentaplex Digital Video Recorder V2.6 MODEL: CDR1660 / CDR0860 / CDR0460 Copyright © 2009 Clover Electronics U.S.A.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Table of Contents ABOUT THIS MANUAL ............................................................................................ 7 1. UNPACKING ...................................................................................................... 8 1.1. H.264 STAND-ALONE DIGITAL VIDEO RECORDER................................................................................................. 9 2. FEATURES ...........................
MODEL: CDR1660 / CDR0860 / CDR0460 7.7.1.4. 7.7.1.5. 7.7.1.6. 7.7.1.7. 7.7.2. 7.7.2.1. 7.7.2.2. 7.7.2.3. 7.8. H.264 STAND-ALONE DVR USER MANUAL V 2.6 SLOW .................................................................................................................................... 38 LOOP PLAYBACK ................................................................................................................. 39 PLAYBACK BUTTONS......................................................................
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.3.2.2.1. INTERNET TIME ADJUST ................................................................................................. 70 8.3.2.2.2. SELECT TIME ZONE ......................................................................................................... 70 8.3.2.2.3. DAYLIGHT SAVING TIME .................................................................................................. 71 8.3.2.3. TIME TRIMMING ........
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 ABOUT THIS MANUAL This is the Instruction Manual for H.264 Stand-Alone Digital Video Recorder, Model CDR1660, CDR0860 and CDR0460. The middle digit(s) of the model numbers (e.g.: 4, 8 and 16) represent the number of cameras of the DVR. This Manual describes how to install and operate the DVR system and provides specifications and features.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 1. UNPACKING Care should be taken when unpacking to avoid damaging the system. Please ensure that the following items are included. Note: Contact your dealer immediately if any components are missing.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 1.1. H.264 STAND-ALONE DIGITAL VIDEO RECORDER CDR1660/CDR0860/CDR0460 is the most reliable and functional embedded DVR system available today. The system displays 4/8/16 channels of live images in real time speed, compresses data digitally and records them to the Hard disk drive, which can be replayed and searched easily any time.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 2. FEATURES H.264 Compression Algorithm The most advanced compression available today. Multi Functional Record Powerful, multiple record modes available: Normal (Continuous, Manual), Alarm, Motion Detection and Schedule Recording. Pentaplex Function This DVR operates live, record, playback, copy and network transmission of pictures (over the RJ-45 Interface) simultaneously.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 3. WHAT TO DO AT THE TIME OF INSTALLATION The system should be installed in the following order; 1. Make sure all the required hardware is available. - CDR0460/ 0860/ 1660, 4CH/ 8CH/ 16CH DVR - Up to 4/ 8/ 16 cameras - CCTV monitor or TV set if necessary - Network cable if connecting to a PC 2. Connect the cameras to the DVR (Refer to chapter 6.2 CAMERA CONNECTION on page 24.). 4.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 4. SPECIFICATIONS Video Video Input 16/8/4 CH (BNC) Input Level 1.0Vp-p±10% Composite, 75Ω Balanced Video Standard AUTO Main Monitor Output 1.0 Vp-p Composite, 75Ω Balanced Analog Spot Monitor Output 1.0 Vp-p Composite, 75Ω Balanced Camera Name Max.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Searching and Playback Searching Method Time/Date, Calendar, Event Playback(Reverse) 1, 2, 4, 8,16, 32, 64, 128 velocity 1/2, 1/4,1/8,1/16, 1/32, 1/64, 1/128 Copy Device Internal CD/DVD RW Not supported Media Support USB 2.0 USB(2.0) memory stick, CD-R, CD-RW, DVD-RW, DVD+RW, DVD RAM, External HDD USB(2.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Environmental Operating Temp 0℃ ~ + 40℃ Storage Temperature -10℃ ~ + 60℃ Humidity 30 ~ 90%RH (non-condensing) Physical Construction Shape Consumer Style Construction Material Plastics Front Steel Case Body Color Black color With Plastic Key Dimension 340 (W) x 60(H) x 248 (D) mm Weight Approx.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 5. OVERVIEW AND CONTROLS There are 3 ways to operate the system by pressing the buttons on the front panel or buttons on the remote controller and clicking the mouse. 5.1. FRONT PANEL 1. REC Key Press this key to start to record. In order to stop recording, press this key again. 2. ESC Key Press this key to go back to the previous menu or exit from the present screen. 3.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 10. CH SELECT/ ENTER Key a) Press this key to select the desired channel in full screen. This key is used to toggle between single channels. b) Press this key to execute the selected function in the menu screen or enter the selected submenu. 11.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 5.2.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 5.3. IR REMOTE CONTROLLER Button Name Description 1. (IRIS-/+) Iris close and open of PTZ / Frame by Frame(field by field) playback 2. (ZOOM-/+) Zoom in and out of PTZ 3. SPOT / ESC Enter the spot mode / Return to the previous mode 4. ENTER (HOME) Enter / Go home Position in PTZ mode 5. ( ◀ ) Move the cursor in left direction in the setup menu 6.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 5.4. MOUSE CONTROL AND OPERATIONS Insert the USB Mouse to the USB port which is on the front panel of the DVR as shown in the below figure. NOTE: We recommend you to connect the USB mouse into Port 2 and use Port 1 for USB memory stick.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 a) RECORD Button Click the left button of the mouse on REC icon of the Menu bar to start to record. To stop recording, click the left button of the mouse on REC icon once again. b) SEARCH Button Click the left button of the mouse on SEARCH icon of the Menu bar to access to search functions like CALENDER SEARCH, TIME/DATE SEARCH and EVENT SEARCH and the following screen will be displayed. (EXIT) button to return to the LIVE mode.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 (EXIT) button to return to the LIVE mode. Click the For detail information of copy menu, refer to chapter 7.8. COPY on page 45. d) SETUP Button. Click the left button of the mouse on SETUP icon of the Menu bar to access the main menu and the following screen will be displayed. Click the (EXIT) button to return to the LIVE mode. For detail information of main menu, refer to chapter 8. SETUP on page 53.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 (EXIT) button of the PTZ control bar to return to the LIVE mode. Click the For detail information of PTZ control, refer to chapter 7.5.9. PAN / TILT on page 33. g) DISPLAY Click the left button of the mouse on DISPLAY icon of the Menu bar to get Multi-channel Display. This button can be toggled for multi-screen of 4 channel and 8 channel in case of 8 channel unit, and 4 channel, 8 channel and 16 channel in case of 16 channel unit.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 6. INSTALLATION AND CONNECTIONS 6.1. NOTE FOR INSTALLATION Install the system according to the instructions described in this manual. Avoid any area with high humidity or dust which can shorten lifetime of the system. Choose a well ventilated area and keep minimum of 10” away from obstructions. Do not place the system near heat generation devices.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 6.3.2. CONNECTION OF MONITOR Connect the composite Video Output (VIDEO OUT) of the DVR to the Video IN of Monitor as shown in the below diagram. 6.4. SENSOR CONNECTION If you want, you can install sensors on your DVR system. There are four sensor signal input terminals on the DVR. To install sensors on the DVR, follow the instruction below. The sensor signal input terminals are on the rear panel of the DVR.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 6.5. ALARM (RELAY) CONNECTION If you want, you can install alarm on your DVR system. There is one alarm power switch, which is controlled by the DVR. The ALARM OUTPUT is a relay contactor type and supports N.O.(Normal Open) and C.M.(Common). The Output capacity is DC 30W, AC 62.5VA. A higher capacity can cause system failure. The switch is closed when a sensor is activated.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 6.7. CONNECTION TO AN ETHERNET NETWORK Our Ethernet connector is a RJ45 type. The maximum cable length is 300 ft. When you want to use a longer cable, we suggest using repeater. The below figure shows the straight through and the Crossover cables which are normally used Network Cables. 6.8. POWER CABLE CONNECTION Connect the provided Power adapter and cable to the rear power socket of the DVR as shown in the below figure.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 7. HOW TO OPERATE 7.1. GENERAL INFORMATION You can operate all functions of the system by use of buttons located on the front panel, remote controller and a mouse. Additionally, you can control this unit with an external keyboard controller via RS-485 or can remotely control via the Ethernet port located on the back of the unit. System status is indicated by either LED lights on the front panel or the monitor.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 The hard drive overwrite is on as default so the counter will remain as 0 and the DVR will continue to write on to the hard drive from the beginning. The counter will remain 0 as long as the hard drive is full with previously recorded data, and will display its original size once the hard drive is formatted. In playback mode, it displays the direction and the speed of the playback.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 AUTO SEQ notification is displayed on the upper left hand corner of the screen while the system is in the AUTO SEQUENCE mode. 7.5.4. LIVE AUDIO This unit can support 1 channel audio (line audio only). Press the AUDIO SEL button of the remote controller to turn the Audio ON or OFF while pressing FUNCTION button. Change the “AUDIO RECORDING” to ON to do audio recording. 7.5.4.1.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 ① Use the directional buttons to move the zoom window to the desired location. ② Toggle x2, x4 and normal screens by clicking button. the ③ Click the button or press the ESC button of the remote controller to exit out of the zoom mode. 7.5.6.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 ① Clicking the numeric buttons on the PIP control bar or pressing the numeric buttons of the remote controller will change the PIP window to change the channel to the desired channel. ② Click the directional buttons on the PIP control bar or press the directional buttons of the remote controller or the front panel to place the PIP window to the desired location on the screen.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 The spot monitor will display the channel accordingly. Press the SPOT button of the remote controller to exit from Spot monitor mode. 7.5.8. OSD ON / OFF OSD ON/OFF is possible in the live mode or record mode. Click the OSD icon on the MENU bar to turn the OSD (On Screen Display) ON or OFF. When the OSD is in OFF position, all the texts on the screen will be disappeared.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Click the PTZ button on the MENU bar or press the PTZ button of the remote controller in the live mode to access the PAN/TILT cameras. ① ZOOM: Zoom in and out by clicking on the - or + buttons. ② FOCUS: Focus in and out by clicking on the – or + buttons. ③ IRIS: Control the iris open and iris close by clicking on the – or + buttons. ④ HOME: Return the PTZ camera to Home position by clicking this button.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 7.6.2. MOTION RECORDING Motion recording is yet another effective form of event recording that is triggered when a channel detects motion in its field of view as the H.264 compression algorithm allows for accurate and error-free motion detection. Click the SETUP icon on the MENU bar or press the MENU button of the remote controller or the front panel in the live mode and the MAIN MENU window will be displayed.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Select the ALARM RECORDING ON or OFF and set the other items to the desired values. The channels on which the alarm is triggered will display the “ALARM” message and you can hear the beep sound by 5 seconds interval for 30 seconds. The REC button will light up as the DVR starts to record and the channel status will change to red. The recording will include the pre and post recording time on the channels that are recording.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Click the button on the playback control bar or press the DIR (Direction) button of the remote controller or the front panel to change the playback direction. Click the button on the playback control bar or press the PLAY/PAUSE button during the playback to pause the playback. When the playback reaches the end of the recorded data, then the playback will pause automatically. 7.7.1.2.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Clicking the button on the playback control bar or pressing the DIR button will change the direction of fast forward to rewind while maintaining the same speed. 7.7.1.3. PICTURE-BY-PICTURE Pause the playback by pressing the PLAY/PAUSE button of the remote controller or the front panel. Use the IRIS- and IRIS+ buttons of the remote controller to play or to play in reverse the recorded data picture-by-picture. 7.7.1.4.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Clicking the button on the playback control bar or pressing the DIR button of the remote controller or the front panel will change the direction of slow playback to the opposite direction while maintaining the same speed. 7.7.1.5. LOOP PLAYBACK The playback can be marked in two different locations so that it can be looped repeatedly.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 When the end of the loop is reached, the playback returns to POSITION A and the loop playback is repeated. Press the PIP button of the remote controller to exit from the loop playback mode. 7.7.1.6. PLAYBACK BUTTONS Click the right button of the mouse in playback mode and you can see the playback control bar on the screen like the left picture. You can control the playback mode by clicking the desired button.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 7.7.1.7. AUDIO PLAYBACK The audio is always recorded in real time regardless of the recording speed. Press the AUDIO SEL button to turn the AUDIO ON or OFF while pressing FUNCTION button. 7.7.2. ADVANCED PLAYBACK To find and access the recorded data more efficiently, the DVR provides various search modes: calendar search, time/date search and event search. 7.7.2.1.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 To change the month, click the MONTH button and then click the desired month or highlight the MONTH button using ▲,▼,◀, ▶ buttons and press the ENTER button and then highlight the desired month using ▲,▼,◀, ▶ buttons and then press the ENTER button of the remote controller or the front panel. To change the year, click the YEAR button and then click the desired numeric buttons and then click the ) button on the year input box.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 7.7.2.2. TIME / DATE SEARCH Time search provides an overview of the recorded data from the earliest available recording to the latest available recording. At the SEARCH menu, Double-click TIME/DATE SEARCH or highlight TIME/DATE SEARCH using ▲,▼,◀, ▶ buttons and then press the ENTER button of the remote controller or the front panel to access the TIME/DATE SEARCH screen.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 If any of the channels need to be viewed in full screen mode, select the desired channel by clicking the left button of the mouse. Or in case of using the remote controller of the front panel buttons, highlight CHANNEL using the ▲,▼,◀, ▶ buttons and press the ENTER button and then highlight the desired channel and press the ENTER button. Select the event type by clicking the left button of the mouse.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 To start the playback, double-click the desired event or highlight the desired event using the ▲,▼,◀, ▶ buttons and then press the ENTER button of the remote controller or the front panel. The example to the left is playing back motion triggered recording. Refer to chapter 7.7.1 BASIC PLAYBACK on page 36 to maneuver through the playback as needed. 7.8.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 And the COPY menu will be displayed like the left picture. CD-RW, DVD±RW and DVD RAM media must be formatted prior to backup. Double-click the MEDIA FORMAT or move the cursor to MEDIA FORMAT using the ▲,▼ buttons of the remote controller or the front panel and then press the ENTER button to access MEDIA FORMAT submenu Select USB 1 or USB2 by clicking the left button of the mouse.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Click YES to begin formatting and double-click NO to cancel. Or move the cursor using the ▲,▼ buttons of the remote controller or the front panel and then press the ENTER button to select YES or NO. FORMATTING will be displayed during the process. The process may take up to approximately 20 minutes depending on the format of the backup disk. When the process is completed, SUCCESS will be displayed.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 CDR0460 (4channel) a. Select the MEDIA type (USB 1 or USB 2: DVR USB port number to be connected) by clicking the left button of the mouse or moving the cursor using ▲,▼ buttons and pressing the ENTER button from the remote controller or the front panel. b. Select the channels to be backed up. By default, all channels are selected.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 7.8.2. CD-R The process is same as above, chapter 7.8.1. CD-RW / DVD-RW / DVD+RW / DVD RAM on page 45. After clicking COPY to start the backup and before displaying the copying progress, The DVR will start creating a buffer for the selected data to be backed up. The status of the buffer being created will be displayed in the upper right corner of the screen. 7.8.3. USB FLASH MEMORY Insert the flash memory into any available USB 2.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 And you can see the playback image of the selected file like the left picture. RECOMMENDED USB BRANDS The USB 2.0 flash memory comes in various sizes, up to 8 Gigabytes of storage per flash memory. It is much faster in comparison to optical media when it comes to copying necessary files. The following manufacturers’ models have been tested to be fully compatible with the DVR.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 As the compatibility is continuously being tested, please check with the seller before using non-listed manufacturers’ models. NOTE: User should format a media before using. We recommend Standard USB A type and we don’t recommend use other USB A type.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Double-click YES to stop the backup process. Or in case of using the remote controller or the front panel buttons, highlight YES using the ▲,▼,◀, ▶ buttons and then press the ENTER button. 7.8.6. FULL MEDIA CAPACITY DURING COPYING If the media is full during copying, you can see the message, “MEDIA FULL OR FAIL. PRESS [COPY]”. At that time, click the COPY icon on the MENU bar or press the COPY button of the remote controller.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Double-click YES to continue copying. Or in case of using the remote controller or the front panel buttons, highlight YES using the ▲,▼,◀, ▶ buttons and then press the ENTER button. If you want to stop copying, double-click NO or highlight NO and then press the ENTER button. 8. SETUP It is possible to set up the menus in the live mode and partly in the record mode.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.1.1. AUTO SEQUENCE CDR0460 (4channel) At the SCREEN menu, Double-click AUTO SEQUENCE or highlight AUTO SEQUENCE and then press the ENTER button and the AUTO SEQUENCE menu will be displayed like the left picture. Define the display duration from 0 to 10 seconds. 0 seconds disables the specific display mode’s inclusion in the sequence. The default is 2 seconds.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.1.2.2. HDD FREE SPACE MODE Select the display mode for the remaining free space on the hard disk drive. The default is in percentage. Click the left button of the mouse on the value. Or in case of using the remote controller or the front panel buttons, highlight HDD FREE SPACE MODE using the ▲,▼ buttons and press the ENTER button and then move the cursor to the desired value(PERCENT or GIGABYTE) and press the ENTER button.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Click the left button of the mouse on the value. Or in case of using the remote controller or the front panel buttons, highlight RECORD STATUS using the ▲,▼ buttons and press the ENTER button and then move the cursor to the desired value(WHITE or BLACK) and press the ENTER button. WHITE: The color of the border line will be displayed on the multi-channel screen in white.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 b) COVERT (CAMERA ON/OFF) Each camera can be convert by setting ON or OFF in the CAMERA menu. The covert function is available in the live mode. Click the COVERT ON/OFF button of the desired channel and select ON or OFF.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Click the PTZ button of the channel where the PTZ camera is connected and select the appropriate protocol type. Or in case of using the remote controller or the front panel buttons, highlight the PTZ button of the channel where the PTZ camera is connected and press the ENTER button and then highlight the desired value and press the ENTER button. The default is NONE.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.1.4. SPOT At the SCREEN menu, Double-click SPOT or highlight SPOT and then press the ENTER button and the SPOT menu will be displayed like the left picture. Click the X button or press the ESC button to exit from this screen. 8.1.4.1. SPOT OUTPUT User can select the SPOT OUTPUT type. There are 3 types of SPOT OUTPUT type namely MANUAL, EVENT and SEQUENCE. MANUAL: Manually select the channel of spot monitor.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.1.5. VIDEO ENHANCEMENT At the SCREEN menu, Double-click VIDEO ENHANCEMENT or highlight VIDEO ENHANCEMENT and then press the ENTER button and the VIDEO ENHANCEMENT menu will be displayed like the left picture. Click the X button or press the ESC button to exit from this screen. 8.1.5.1. CHANNEL Click the left button of the mouse on the value and select the channel which needs to be adjusted.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.1.5.3. CONTRAST At the VIDEO ENHANCEMENT menu, Double-click CONTRAST or highlight CONTRAST and then press the ENTER button and the CONTRAST menu will be displayed like the left picture. Adjust the contrast by clicking or pressing the ◀, ▶ buttons. The default is 50%. Click the X button or press the ESC button to exit from this screen. 8.1.5.4.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.1.6. EVENT SCREEN MODE Define how the main video output reacts when an event occurs. Click the left button of the mouse on the value and select the desired value. Or in case of using the remote controller or the front panel buttons, highlight EVENT SCREEN MODE using the ▲,▼ buttons and press the ENTER button and then move the cursor to the desired event screen mode using the ◀, ▶ buttons and press the ENTER button.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.2.1. RECORDING SETUP Each channel can be individually scheduled and adjusted. Scheduling allows the DVR to record at specific times even when the REC button is not on. Turning the REC button on means the manual (continuous) recording.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.2.1.2. RECORDING SPEED (FRAMES PER SECOND) This allows the user to configure the recording speed (FPS) for each channel. Click the F/S button of the desired channel in the RECORDING SETUP menu and select one of the recording speed among 1, 2, 4, 5, 6, 8, 10, 15, 30 and OFF on the pop-up window by clicking the mouse.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.2.1.4. SCHEDULE RECORDING User can set the SCHEDULE recording of each Channel. Click the SCHEDULE ( ) button of the desired channel in the RECORDING SETUP menu and you can see the SCHEDULE menu like the left picture. Or in case of using the remote controller or the front panel buttons, highlight the SCHEDULE ( ) button of the desired channel using the ▲,▼,◀, ▶ buttons and press the ENTER button.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.2.1.5.2. PRE RECORDING TIME Select the desired time for PRE RECORDING TIME by clicking the left button of the mouse on the value. Or in case of using the remote controller or the front panel buttons, highlight PRE RECORDING TIME and press the ENTER button and then move the cursor to the desired value using the ◀, ▶ buttons and press the ENTER button.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.2.1.6. ALARM RECORDING User can set the ALARM RECORDING of each Channel. Click the ALARM ( ) button of the desired channel in the RECORDING SETUP menu and you can see the SENSOR menu like the left picture. Or in case of using the remote controller or the front panel buttons, highlight the ALARM ( ) button of the desired channel using the ▲,▼,◀, ▶ buttons and press the ENTER button.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 NOTE: This unit cannot use the Common Microphones. Instead, the User has to connect the audio out of a Camera or a Microphone with a Line Out facility. 8.3. SYSTEM System setup defines various system settings such as hard disk drive settings, system clock, password for multiple users and buzzer etc.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.3.1.2. HDD INFORMATION User can see the details information for the installed HDDs. At the HDD menu, Double-click HDD INFORMATION or highlight HDD INFORMATION and then press the ENTER button and the HDD INFORMATION screen will be displayed like the left picture. Click the X button or press the ESC button to exit from this screen. TOTAL SPACE: Displays the total capacity of the HDD.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.3.2.1. TIME & DATE At the CLOCK Menu, Double-click TIME & DATE or highlight TIME & DATE and then press the ENTER button and the TIME & DATE setup screen will be displayed like the left picture. Select the values (year/month/date and hour:minute:second) by clicking the left button of the mouse and then click the APPLY button to set.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 The default GMT is GMT-08:00. Refer to Appendix 1. TIME ZONE LISTING on page 99. NOTE: You have to match the GMT related to their Country Zone. 8.3.2.2.3. DAYLIGHT SAVING TIME Select the DAYLIGHT SAVINGS TIME option on or off by clicking the left button of the mouse on the value.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.3.3. BUZZER You can hear the beep sound when event occurs or key operation if the BUZZER setup is ON. At the SYSTEM menu, Click the left button of the mouse on the value. Or in case of using the remote controller or the front panel buttons, highlight BUZZER and press the ENTER button and then move the cursor to the desired value using the ▲,▼ buttons and press the ENTER button. The Default value is ON.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Copy button Live Audio selection Main Menu button PTZ control button NOTE: In case of the PASSWORD CHECK is ON, only ADMIN can set the NEW PASSWORD. 8.3.4.2. SET PASSWORD At the PASSWORD menu, Double-click SET PASSWORD or highlight SET PASSWORD and then press the ENTER button and the PASSWORD INPUT screen will be displayed like the left picture. Click the X button or press the ESC button to exit from this screen.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.3.5. FACTORY DEFAULT SETTING At the SYSTEM menu, Double-click FACTORY DEFAULT SETTING or highlight FACTORY DEFAULT SETTING and then press the ENTER button and the FACTORY DEFAULT window will be displayed like the left picture. Double-click YES to reset all menu settings back to factory default. Or double-click NO or click the X button to exit without resetting.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.3.7. SYSTEM IFORMATION System Information provides the information about the Software version (Firmware version) of the DVR and Hardware version of the FPGA chip. CDR0460 (4channel) At the SYSTEM menu, Double-click SYSTEM INFORMATION or highlight SYSTEM INFORMATION and then press the ENTER button and the SYSTEM INFORMATION screen will be displayed like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.4.1. NETWORK At the LINK menu, Double-click NETWORK or highlight NETWORK and then press the ENTER button and you can see the NETWORK menu like the left picture. Click the X button or press the ESC button to exit from this screen. 8.4.1.1. DHCP At the NETWORK menu, Double-click DHCP or highlight DHCP and then press the ENTER button and you can see the DHCP menu like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.4.1.2.1. IP ADDRESS Define the IP address if the DHCP is set to off. The DVR should be provided with its own static IP address. Click the left button of the mouse on the value and the pop-up window will be displayed. Click the buttons and then click the ENTER ( ) button to enter the IP address.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.4.1.4.1. SERVER 1 At the DDNS SERVER menu, Double-click SERVER 1 or highlight SERVER 1 and then press the ENTER button and you can see the IP address input screen like the left picture. Click the X button or press the ESC button to exit from this screen. Input the IP address by clicking the mouse or using the directional buttons to move the cursor and pressing the ENTER button to select the character. The default is 211.174.251.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.4.2. RS485 At the LINK menu, Double-click RS-485 or highlight RS-485 and then press the ENTER button and you can see the RS-485 menu like the left picture. Click the X button or press the ESC button to exit from this screen. 8.4.2.1. SYSTEM ID Select the DVR’s system ID between 0 to 255. The system ID should be issued when controlling multiple DVRs with a keyboard controller.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 At the LINK menu, Double-click E-MAIL or highlight E-MAIL and then press the ENTER button and you can see the E-MAIL menu like the left picture. Click the X button or press the ESC button to exit from this screen. 8.4.3.1. SEND E-MAIL Select the e-mail notification on or off by clicking the left button of the mouse on the value.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8.5. SEARCH At the MAIN MENU, Double-click SEARCH or highlight SEARCH and then press the ENTER button and you can see the SEARCH menu like the left picture. Click the X button or press the ESC button to exit from this screen. Refer to chapter 7.7.2. ADVANCED PLAYBACK on page 41. 8.6. COPY At the MAIN MENU, Double-click COPY or highlight COPY and then press the ENTER button and you can see the COPY menu like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 9. CLIENT PROGRAM: DVR VIEWER The DVR Viewer is a dedicated client program that connects to, monitors and manages up to 16 DVRs simultaneously. 9.1. SYSTEM REQUIREMENT The DVR Viewer receives, decodes and displays data for up to 16 DVRs or up to 256 cameras simultaneously requiring a powerful personal computer to take full advantage of the program. The following is the recommended PC specification.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 The DVR viewer will be installed in its default folder of C:\Program Files\DVR\DVR-Viewer. If the folder needs to be changed, click on ‘BROWSE…’ button and then select a different folder. Click on ‘INSTALL’ for installing the program. Click on ‘OK’ to finish the Installation process.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 NOTE: In case of the Windows XP OS, user has to download the UDF drivers prior to the installation of the DVR Viewer Program because the DVR is using the UDF file system while copying and playing the data. 9.1.1.2. CODEC INSTALLATION After DVR VIEWER setup is complete, CODEC installation will start the message. Click on NEXT. CODEC will be installed in its default folder of C:\Program Files\DVR\H.264_CODEC.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Click on ‘INSTALL’ for installing the program. Click on ‘OK’ to finish the Installation process.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 9.2. VIEWER - LAYOUT Locate the DVR Viewer icon on the desktop and double-click on it to run the client software. The program can also be located in START- Programs – DVR-Viewer. CDR0460 (4channel) NOTE : This unit can support only 1 Relay output. If the Alarm is triggered, you can see the 1 channel LED of the Relay out will turn to “RED”. Table.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 9.3. CONFIG ① Version Number Display the current version of the DVR Viewer program. CDR0860 (8channel) CDR (16channel) NOTE: CDR0860 /CDR1660: It can be seen in information of the 8channel or 16channel ② COPY Copy and the Live + Copy. ▫ Quick Copy Click on the Quick Copy for faster copying the recorded data from the DVR to the Host Program (DVR VIEWER) without live images.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 ③ Video Enhance User can adjust the Brightness of screen by clicking on the bar or dragging the slider on the bar. User can adjust the Contrast of screen by clicking on the bar or dragging the slider on the bar. User can adjust the Hue of screen by clicking on the bar or dragging the slider on the bar. User can adjust the Saturation of screen by clicking on the bar or dragging the slider on the bar.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 9.4. CONNECTION Click on the CONNECT button of the DVR VIEWER. By clicking the Connect button, the below window pops up. Click on the New button, the below screen appears. ] a) DVR NAME User can enter the DVR Name as he desires. For Example: User can input the Model Number or Name of the DVR. b) DVR IP Address User should enter the IP address of the connected DVR. c) DVR MAC User should enter the MAC address of the connected DVR.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 DVR. Once the User enters the above details, he can save the data by clicking on the SAVE button. 9.5. CAPTURE User can take a snapshot in the Live mode by clicking on the CAPTURE icon as shown in the below screen. By clicking the CAPTURE icon, the below screen pops up.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 a) Save to file. The picture can be saved as a JPEG or Bitmap format. b) Print Send the picture to the printer. c) Printer Setup User can print the .jpeg image by clicking on the Printer Setup. d) Close By pressing the Close button, the above screen will disappear. 9.6.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 9.7.1. PLAYER User has to this screen to playback the recorded video. By clicking the PLAYER icon on the DVR VIEWER, the below window pops up.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 1) MULTI SCREEN User can split the screen into 4, 9 and 16 by clicking the Multi Screen icon. 2) STATUS DISPLAY User can see the status of the playback data along with time and date by pressing the below said icons. 3) CHANNEL BUTTON User can select the desired channel by clicking on the CHANNEL button. 4) SEARCH User can search the recorded data by clicking on the SEARCH button.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 5) CONVERT AVI a) User can click on the CONVERT AVI button to convert the file into AVI format. At first, click the CONVERT AVI button b) Next, select the folder for AVI file will be saved. And click OK button.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 c) AVI Converting the Message. d) Converting Complete.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 6) PRINT In live or playback mode, select any of the channels and then click on PRINT to bring up the screen print window. e) Save to file. The picture can be saved as a JPEG or Bitmap format. f) Print Send the picture to the printer. g) Printer Setup User can print the .jpeg image by clicking on the Printer Setup. h) Close By pressing the Close button, the above screen will disappear.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 8) BRIGHTNESS/CONTRAST/SATURATION User can adjust the Brightness of screen by clicking on the bar or dragging the slider on the bar User can adjust the Contrast of screen by clicking on the bar or dragging the slider on the bar User can adjust the Saturation of the screen by clicking on the bar or dragging the slider on the bar. 9) Exit button. If the user wants to exit from the Player screen, press this button. 10) SPEAKER.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 9.8. COPY It is possible to copy the recorded data from the DVR system to a client PC by using the Copy button in the Multi mode only. Click the Copy button to view the below screen. To copy the recorded data from the DVR system to a PC, and then the Copy Time Setup Window will be displayed.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 9.10. Pan / Tilt and Preset Buttons User can control the PTZ camera through DVR Viewer. Please refer to the below diagram for more detailed explanation on PTZ functions. 1) CHANNEL SELECT Button User can select the desired channel by clicking on the Numeric icon as shown in the below figure. Also, user can pan and tilt the connected PTZ camera by clicking on the directional buttons.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 5) PRESET Functions User can set a maximum of 255 preset positions. By clicking on the Move button, User can move the camera to the desired location. User can save the Preset positions by clicking on the Save button. 6) SPEAKER User can listen to any one of the 4/8/16 channels with audio recording over the internet by clicking the SPEAKER icon.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 10. INTERNET EXPLORER (WEB BROWSER) The system requirement is same as network client viewer. Enter the address on internet window www.cloverddns.com Check the “firewall” or “security wall” in Internet option. How to abandon firewall or security wall : Click “TOOL” and “Internet option” Click the “Security” section on Internet option window.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Click “Trusted site” and Enter “SITE” box. Add the address – https://www.cloverddns.com in blank and click the “ADD” button. Then, you can see the site (https://www.cloverddns.com) is added. Click OK button.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 If you still see this page, please allow the “Active control” and install it. And you can see the left Security window. Please Click “INSTALL” button. Use the following process. 1. DVR search button click 2. If you select one of the search window and press the select button. IP Address/Port information on the window will enter the IP address automatically. 3. Click the Connect button.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 You can execute “Web browser” now. Enter the IP address or Mac address to connect the DVR. Refer to chapter 9. CLIENT PROGRAM: DVR VIEWER on page 82 for operating the web browser.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 11. Hard Disk Drive (HDD) Installation a) Remove the top cover of your DVR and connect both the power and Signal (SATA) cables to the HDD as shown below. Put the HDD on the HDD plate. Refer to the following pictures. b) Finally, Screw up to fix the HDD as the following pictures and then recover the DVR case.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 12. APPENDIX CONTENTS 12.1. 12.2. 12.3. 12.4. TIME ZONE LISTING RECORDING TIME TABLE FACTORY DEFAULT SETTINGS Warranty & Factory Service 12.1.
MODEL: CDR1660 / CDR0860 / CDR0460 GMT+02:00 GMT+03:00 GMT+03:00 GMT+03:00 GMT+03:00 GMT+03:30 GMT+04:00 GMT+04:00 GMT+04:30 GMT+05:00 GMT+05:00 GMT+05:30 GMT+05:45 GMT+06:00 GMT+06:00 GMT+06:00 GMT+06:30 GMT+07:00 GMT+07:00 GMT+08:00 GMT+08:00 GMT+08:00 GMT+08:00 GMT+08:00 GMT+09:00 GMT+09:00 GMT+09:00 GMT+09:30 GMT+09:30 GMT+10:00 GMT+10:00 GMT+10:00 GMT+10:00 GMT+10:00 GMT+11:00 GMT+12:00 GMT+12:00 GMT+13:00 H.264 STAND-ALONE DVR USER MANUAL V 2.6 Jerusalem Baghdad Kuwait, Riyadh Moscow, St.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 12.2.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 12.3.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 SYSTEM LOG SYSTEM INFORMATION LINK DHCP STATIC IP NETWORK OFF IP ADDRESS 192.168.0.2 SUBNET MASK 255.255.255.0 GATEWAY 192.168.0.1 DNS 0.0.0.0 PORT 5400 SERVER 1 211.174.251.155 SERVER 2 211.174.251.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 12.4. Warranty & Factory Service Limited 2Year Warranty This warranty gives the original purchaser specific legal rights and you may also have other rights, which may vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair it for free for 2 years on parts and labor from the date of original purchase.
