INSTRUCTION MANUAL BALL-JOINT DAY AND NIGHT COLOR CAMERA MODEL HDC100 Copyright © 2007 Clover Electronics U.S.A. All Rights Reserved.
PRECAUTIONS • • • • • • • To avoid electrical shock, do not open the case of this product. Operate this product using only the supplied AC Power supply. Do not overload electrical outlets or extension cords; this can result in fire or electric shock. Keep this product away from strong magnetic fields. Do not expose this product in direct sunlight or strong reflected rays. Refer servicing to qualified personnel only. Do not change or modify this product, the warranty will be voided.
Note: ▪ Apply the provided AC adapter only. ▪ The total length of cable must not exceed 200’ including extension cable. TROUBLE SHOOTING If the camera does not function properly, check the following points before contacting the service center.
The image on the screen flickers Picture rolls and jumps, scrambled picture Picture smaller than screen too strong light, change the position Does the camera face to directly to the sunlight or fluorescent light? Change the camera position Improper V-hold control. Setting on your monitor House current may be too low SPECIFICATIONS • • • • • • • • • • • • • • • • Image sensor Scanning system Horizontal resolution Shutter speed Sync.
2. We will repair or replace, and return to the owner the system under this limited warranty. 3. Please pack the system carefully and securely using the original packing materials, and send it prepaid and insured to: 13073 E. 166th St, Cerritos, CA 90703. 4. Please include a check for $25.00 to cover the cost of return postage and handling. If the system is returned within the warranty period, please include a proof of purchase.
