INSTRUCTION MANUAL DAY/NIGHT LONG RANGE VARI-FOCAL COLOR CAMERA MODEL HDC553 Copyright © 2009 Clover Electronics U.S.A. All Rights Reserved.
PRECAUTIONS • • • • • • • • To avoid electrical shock, do not open the case of this product. Do not stamp fingerprints on the window for lens. Operate this product using only the supplied AC Power supply. Do not overload electrical outlets or extension cords; this can result in fire or electric shock. Keep this product away from strong magnetic fields. Do not expose this product in direct sunlight or strong reflected rays. Refer servicing to qualified personnel only.
5. Loosen the locking screw⑧ with the provided hex-head wrench and turn the camera clockwise or counter-clockwise to upright images on the screen and turn it clockwise to secure. 6. If necessary, change the settings to get the best images depending on your application by using the button on the bottom of the camera. - Get rid of the cap⑨ for the OSD button by turning counter-clockwise and then change the settings (refer to the included instruction manual for OSD).
HOW TO ADJUST ANGLE OF VIEW 1. Vari-focal lens① Easily changeable angle of view: 5 to 50mm 2. Remove the sun-visor② and turn the locking screws③ on the knob with the provided hex-head wrench counter-clockwise to make easier adjustment for angle of view. Do not stamp your fingerprint on the window, which may affect picture quality. 3. ∞↔N④ Turn this adjustment ring④ clockwise or counter-clockwise to set the focus. 4.
Note: ▪ Apply the provided AC Power supply only. ▪ The total length of cable must not exceed 200’ including extension cable. TROUBLE SHOOTING If the camera does not function properly, check the following points before contacting the service center.
SPECIFICATIONS • • • • • • • • • • • • • • • • • • • • • • Image sensor Total pixels Effective Pixels Scanning system O.S.D Backlight Resolution S/N (Y signal) Min.
HOW TO OBTAIN FACTORY SERVICE 1. Original purchaser must fill out a warranty card and mail it to the factory with model number, serial number and the date of purchase. 2. We will repair or replace, and return to the owner the system under this limited warranty. 3. Please pack the system carefully and securely using the original packing materials, and send it prepaid and insured to: 13073 E. 166th St, Cerritos, CA 90703. 4. Please include a check for $25.00 to cover the cost of return postage and handling.