Specifications

Correct wiring:
100M
Wrong wiring:
1. VISITOR CALLING
■ When a visitor presses the CALL button on the camera, the chime sounds and the visitor appears on the monitor screen
automatically.
■ Pick up the handset to speak to the visitor.
■ Hanging up the handset returns the monitor to stand by mode.
2. MONITORING OPERATION
■ Press the MONITOR button when the handset is in position, you will see the camera’s field of view for about 90 seconds.
You can speak to the visitor at this time, only if you pick up the handset.
3. OPERATION OF THE ELECTRIC DOOR RELEASE LOCK
■ Press and hold the DOOR release button on the monitor to activate the electric door strike (optional accessory required).
■ Note that the door release is operational when using the camera.
OPERATION