Specifications

TH82 Series Reference Manual
29/29
1,49 Font B (8x16) selected.
[DETAILES] The ESC ! command can also select the character fonts but the setting of the last received
command is effective.
ESC R Select an international character set
[FORMAT] <1B>H<52>H<n>
[RANGE]
0≦n≦13
[FUNCTION] *Selects an international character set.
*The code table is as follows.
ESC S
Sel
ect
standard
mode
[FORMAT]
<1B>H<53>H
[FUNCTION] Switches from page mode to standard mode.
[DETAILES] *This command is effective only in page mode.
*Data buffered in page mode are cleared.
*This command sets the print position to the beginning of the next line after executed.
*The printing area set by ESC W are initialized.
*This command switches the setting for the following commands which have each value
independently in standard mode and page mode to those for standard mode.
①Set right-side character spacing: ESC SP、FS S
②Select default line spacing: ESC 2、ESC 3
*Only setting is possible for the following commands in standard mode.
① ESC W Set printing area in page mode.
② EST T Select printing direction in page mode.
*The following commands are ignored in standard mode.
① GS $ Set absolute vertical print position in page mode.
② GS ╲ Set relative vertical print position in page mode.
*Standard mode is selected automatically when power is turned on or ESC @ is used.
23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E
n=0 (U.S.A)
n=1 (FRANCE)
n=2 (GERMANY)
n=3 (U.K)
n=4 (DENMARK)
n=5 (SWEDEN)
n=6 (ITALY)
n=7 (SPAIN)
n=8 (JAPAN)
n=9 (NORWAY)
n=10 (DENMARK2)
n=11 (SPAIN2)
n=12 (LATIN)
n=13 (KOREA)