Specifications

TH82 Series Reference Manual
35/35
ESC k Select characters (ANK)
[FORMAT] <1B>H<6B>H<n>
[RANGE]
0≦n≦1
[FUNCTION] Select ANK characters specified by n.
VALUE
BIT FUNCTION
0 1
0 Select characters Mintyo Gothic
1 Undefined - -
2 Undefined - -
3 Undefined - -
4 Undefined - -
5 Undefined - -
6 Undefined - -
7 Undefined - -
[CAUTION] This command ignores in the model with one of above characters
ESC m Partial cut (one point left cut)
[FORMAT] <1B>H<69>H
[RANGE] -
[FUNCTION] Sets Partial cut.
[CAUTION] * Paper must be fed 3 mm after printing to prevent paper jam.
ESC o Print logo pattern
[FORMAT] <1B>H<6F>H<n1><n2>
[RANGE]
1≦n1≦127
1≦n2≦127
[FUNCTION] This command prints logo pattern.
[CAUTION] *n1 specifies starting block of the logo pattern.
*n2 specifies stopping block of the logo pattern.
Block number 1 Starting block (n1)
Block number N-1 Stopping block (n2)
Block number N
*This command is enabled only when processed at the beginning of a line.
This command is invalid.