Specifications

TH82 Series Reference Manual
4/4
ABOUT THIS MANUAL
GETTING STARTED
CHAPTER 1 contains information on unpacking the printer and setting it up.
CHAPTER 2 contains information on using the printer.
CHAPTER 3 contains information of maintenance and troubleshooting.
CHAPTER 4 contains security information.
SPECIFICATION
CHAPTER 5 contains printers’ specification.
CHAPTER 6 contains character code tables and commands.
APPENDIX A contains information on setting and changing the DIP switches.
APPENDIX B tells how to download the firmware.
NOTE : This guide includes information about following models.
ANK characters with auto cutter TH-82A
ANK characters without auto cutter TH-82AN
Japanese and Euro-American model: TH-82J
Above model without auto cutter: TH-82JN
*Chinese and Euro-American model: TH-82C
Above model without auto cutter: TH-82CN
Korean and Euro-American model: TH-82K
Above model without auto cutter: TH-82KN
*Note Chinese model merchandising was not fixed under the influence of Chinese
domestic law as of Jan, 2004. For further information, please contact us.
SAFETY DEFINITIONS
In order to avoid hazards to a user or other persons and damage to the product, be sure to observe
the following instructions
For the safety of the personnel and the product, operate the equipment according to the instructions
in this user’s guide. The manufacturer will not be responsible for any problems or damage that
arises from improper use.
WARNING : Warning may result in death or serious injury.
CAUTION : Caution may result in injury or damage to property.
© 2000 Clover Electronics Co., Ltd. All rights reserved.
No part of this document may be reproduced without the expressed permission of Clover
Electronics Co., Ltd.
The material in this document is for informational purpose and is subject to change without notice.
Clover Electronics Co., Ltd. assumes no responsibility for errors or omissions in this document.
No liability is assumed for any damages resulting from the use of the information it contains.