Specifications
TH82 Series Reference Manual
61/61
b: Second byte (error information)
Value
Bit Status
0 1
0 Undefined - -
1 Undefined - -
2 Mechanical error Not occurred occurred
3 Undefined - -
4 Not used Fixed to 0
5 Unrecoverable error Not occurred occurred
6 Head temperature error Not occurred occurred
7 Not used Fixed to 0
c: Third byte (paper sensor information)
Value
Bit Status
0 1
0 Paper roll near-end sensor Paper enough Paper near end
1 Paper roll near-end sensor Paper enough Paper near end
2 Paper roll end sensor Paper present Paper not present
3 Paper roll end sensor Paper present Paper not present
4 Not used Fixed to 0
5 Not used Fixed to 0
6 Not used Fixed to 0
7 Not used Fixed to 0
*Bit 0 and 1 are valid only on near-end sensor model.
d: Fourth byte (paper sensor information)
Value
Bit Status
0 1
0 Not used Fixed to 0
1 Not used Fixed to 0
2 Not used Fixed to 0
3 Not used Fixed to 0
4 Not used Fixed to 0
5 Not used Fixed to 0
6 Not used Fixed to 0
7 Not used Fixed to 0
e: About setting of the drawer sensor.
If two drawers are connected, DIWSW should be specified depending on the relationship between
the drawer and the drawer sensor.
①Drawer is opened and sensor is low: DIPSW-9 : OFF
②Drawer is opened and sensor is high: DIPSW-9 : ON
When the drawer open is high, the open status of plug 2 cannot be confirmed until the plug 2 is
opened if the printer is turned on with the plug 2 opened.
[DEFAULT] n = 0