Operation Manual

3
16. MASTER CONTROL
This knob adjusts the final level of the Main output.
17. POWER INDICATOR
When the power switch is turned on, this indicator will illuminate, so the user may be aware of it.
12. LINE IN
The LINE OUT provides signal output to a cassette deck and home audio equipment.(with XLR socket)
20. POWER SWITCH
This switches the powered mixer on or off.
21. POWER INPUT CONNECTOR WITH FUSE
The POWER INPUT CONNECTOR is connected to electrical outlet by power The powered mixer can be
supplied with AC115V/60Hz~230V/50Hz.
cord.
19. SPEAKER OUTPUT SOCKET
Speakers can be connected to this socket, two speakers can be connected to the powered mixer. When using
2 speakers at the same time, use 8~16ohm speakers. When using one speaker only, use a 4~8ohm speaker,
the total minimum load is 4ohm, if the total load is less than 4ohm, it may damage this powered mixer.
14. LINE VOLUME CONTROL
This knob determines the proportion of the LINE channel signal in the mix, and provide a visual indication of
channel level.
The LINE IN (with RCA allows cassette recorder or CD player to the Main output.sockets)
13. LINE OUT
15. CHANGE INPUT SOURCE
There are 4 input sources for your choose: Line, BLT, DVD and USB.
Turn this knob clockwise to boost low frequency. The control has a shelving response giving 15dB of boost or
cut at 100Hz.
This knob decides the signal level which will be sent to the inside digital delay effect.
11. EFFECT
18. USB SOUND CARD SOCKET
The USB sound card socket connected to computer and controlled by computer. It can record when playing
by computer.
30 0
P
BULLIT 300P PANEL DESCRIPTION
This panel is put in another sound box, and this box is the
pair to the BULLIT 300A box. The socket on this panel co-
nnected to the SPEAKER OUTPUT SOCKET(19).