User's Manual

ManualsBrandsCM Tech ManualsAudio PlayersMP3 Player

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or tele-

vision reception, with can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

- Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not

expressly approved by the grantee or manufacturer could void the users

authority to operate such equipment.

Summary of content (20 pages)

PAGE 1
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance w ith the instructions, may cause harmful interference to radio communications.
PAGE 2
▣ CONTENTS SYSTEM RECOMMENDATION DESCRIPTIONS OF THE PRODUCT ACCESSORIES INSTALLNG THE PROGRAM AND DRIVER UNINSTALLING THE PROGRAM AND DRIVER HOW TO USE THE PROGRAM HOW TO FORMAT THE DEVICE HOW TO UPDATE THE FIRMWARE INSERTING A BATTERY POWER ON / OFF CHANGING THE MODE (MP3 ↔ Voice) PLAY SKIP OR SEARCH REPEAT (A-B) USING THE OPTIONS MENU SETTING THE EQUALIZER (MP3 MODE) REPEAT (MP3 MODE) ADJUSTING THE CONTRAST AUTO-INTELLIGENT POWER-OFF (AI-OFF) RECORDING A VOICE MESSAGE PLAYING A VOICE MESSAGE DELETE A VO
PAGE 3
▣ SYSTEM RECOMMENDATION ■ Processor : Pentium 233MHz or Better ■ OS: Windows 98 / 98SE / ME / 2000 / XP(Home Edition) ■ 1GB Hard Disc or Higher (4GB Recommended) ■ 64MB RAM or Better ■ USB Port ■ Monitor Resolution : 1024 × 768 , 16Bit Color or Better ■ CD-ROM Drive to Install Software ▣ DESCRIPTIONS OF THE PRODUCT ▣ ACCESSORIES Please check to make sure all contents of the box were received. ■ Installation CD ■ USB Cable ■ Battery (1.
PAGE 4
2. In the installation menu, click the “INSTALL” button to start the installation. The installation will proceed as the figures shown below. Follow the Instructions displayed on the screen. 3. Click the “FINISH” button to reboot your PC. This will complete your installation process.
PAGE 5
4. After rebooting PC, connect the player to the USB port of your PC and turn the power on by pressing the “▶/■” button.
PAGE 6
5. When the power is on, the player will display “READY” on the LCD. “New Hardware Found” window will immediately appear as shown below. (This window may slightly vary from the different Windows versions.) 6.
PAGE 7
NOTE No shortcut icon will be created on Windows desktop after installing the CD. The installation CD installs two programs on your PC: Music Box Format and Music Box Update. These icons are found in Start Menu > (All) Programs > Music Box MP3 Player. ▣ UNINSTALLING THE PROGRAM AND DRIVER 1. If the player is connected to PC, unplug it from your computer before starting. 2. Run Add/Remove Programs from the Control Panel to display the list of installed programs. 3.
PAGE 8
5. Finally, click “FINISH” to complete the uninstallation process.
PAGE 9
NOTE If you want to reinstall the programs, please restart your PC before starting a new installation process. If the player program has not installed properly or if you need to reinstall it, it is recommended to first uninstall the program as shown in the above steps. ▣ HOW TO USE THE PROGRAM ■ To download MP3 or data files to the player using Windows Explorer 1. After installing the drivers , connect the player to the PC with the supplied USB cable. 2.
PAGE 10
3. Locate the file(s) you wish to copy to the Music Box. Highlight the files and Dragand-drop the files to the Removable Disk. MP3 music track numbers will be respective to the order in which it is copied to the Music Box. 4. While MP3 files are downloading to the player, “WRITING” will be blinking on the LCD of the player. NOTE If the USB cable is unplugged during “WRITING” mode, all memory will be lost. In this case, Format the drive then Update the firmware.
PAGE 11
5. After the download process is complete, verify there are (MP3) files in the Removable Disk. 6. The player will automatically power on when the USB cable is removed. Press the “▶/■” button to play to the songs. ▣ HOW TO FORMAT THE DEVICE You can format the Music Box like a Removable Disk. If you format the device, all the saved files will be deleted – MP3, data, voice, etc. ■ To run Format with MUSIC BOX FORMAT program (Windows Start Menu): A.
PAGE 12
■ To Format through Windows Explorer: A. Open windows Explorer and select the Removable Disk you want to format. B. Right-click the mouse on the Removable Dis k to display the call-up menu. C. Click either “Format…” or “FORMAT (Music Box MP3 Player)” from the call-up menu. (The call-up menu will vary with the different Windows versions.) 1. Select the Drive you wish to format by selecting from the “Drive” drop-down menu. 2. “Capacity” and “File System” cannot be changed. 3.
PAGE 13
NOTE Quick format process is much shorter and faster than normal format. Normal format is recommended if an error occurs during a writing process. If no removable disk drive is listed in the “Drive” box, remove the battery from the player to res et then retry formatting again. CAUTION Firmware must always be updated after formatting the drive. I f t h e firmware is not updated after format, the drive will not power on.
PAGE 14
▣ INSERTING A BATTERY 1. Open the cover on the back of the player. 2. Insert 1 x AAA battery matching the polarities inscribed in the battery compartment. 3. Close the cover securely on the unit. The device will not power on if the battery cover is not properly placed. ▣ POWER ON / OFF 1. In the off position, press the “▶/■” button to turn the player on. 2. In the on position, press the “▶/■” button for 3 seconds to turn the player off. ▣ CHANGING MODES (MP3 ↔ Voice ) 1.
PAGE 15
▣ SKIP OR SEARCH 1. Press “▶▶” or “◀◀” button to s kip tracks . Skipping tracks can be done in Play or Stop position. 2. Press and Hold “▶▶” or “◀◀” button to fast forward or rewind while a song is playing. The song will not be heard while in search mode. The song will continue to play once “▶▶” or “◀◀” button is released. ▣ REPEAT A-B You can select the section you wish to repeat with this function. It’s great for language studying students.
PAGE 16
2. Highlight “CONTRAST” using the “▶▶” or “◀◀” button. Press the “M” button to confirm selection. 3. Adjust the contrast level by pressing the “▶▶” or “◀◀” button. 4. Press the “M” button to confirm selection. ▣ AUTO-INTELLIGENCE POWER-OFF (AI-OFF) “Auto-intelligence Power-off” is designed to automatically shut down the player if the device is not in use for an extend period of time. The user can manually set the timer to shut down in 1 min, 2 min, or 5 min. 1.
PAGE 17
confirm selection. 4. Highlight “VOICE” using the “▶▶” or “◀◀” button. Press the “M” button to confirm selection. 5. Select the file you wish to delete using the “▶▶” or “◀◀” button. Voice files are represented as /VOICE/V001.WAV on the LCD. Press the “M” button to confirm selection. 6. Highlight “YES” and press the “M” button to delete the file. 7. After you have deleted the file(s), select “Exit” from all the menus by pressing the “M” button.
PAGE 18
This problem occurs due to the incorrect formatting. 1. The downloaded • files are corrupt. 2. The device reads Remove the battery from the player and reinsert it to reset the device. • Format disk and Update the firmware “READY” when not connected to PC. The buttons of the Player does not work. • Check to see if the Key-Guard Lock is activated.
PAGE 19
▣ SPECIFICATION Main Function Memory MP3 Player / Voice Recorder / Removable Dis k 64MB Flash Memory 128MB Flash Memory Interface USB File Transmission Speed 2.7 Mbps Display FSTN LCD Voice Recording 4 Hours (64MB Flash Memory) Capacity 8 Hours (128MB Flash Memory) Battery AAA Battery Life 6 Hours (Play / Record) Output Power 4.
PAGE 20
▣ WARRANTY REGISTRATION CARD Thank you for your purchase. Please fill out the registration card to receive technical assistance and warranty services. This information that you provide will be kept confidential. Thank you.